Adding a New Isotope to the MI Applications Isotope List Step by Step

Adding a New Isotope to the MI Applications Isotope List All Symbia Systems Description: This step by step document will assist the user of E.cam and Symbia SPECT and SPECT/CT systems in adding a single new isotope in the Energy Preset Isotope List. 1. On the Command Module, select and open an acquisition workflow, or the Tuning work- flow. 2. Pause the workflow, and select the acquisition/Tune workflow activity 3. Select the Analyzer tab WorkflowEngine File Tuning View Template Workflow Activities Help Tuning Analyzer Data Selector Isotope Selection: Co 57 Detector Selection: Detector 1 Basic User Advanced User Tuning 4. Open the Presets drop-down menu, and click New Item. 5. For Window Group A, type the name of the isotope to be created. (example: Y-90) 6. Click on Add New Energy Window icon. SIEMENS siemens.com/healthineers Healthineers Setting the PHS Automatic Heights Effective Date: 05/09/2018 | Quality HOOD05162002869584 7. Select Photopeak and click OK. v Detector 2 Save Preset Begin Peaking Pause Between Peak Window Definition Type Parent . Photopeak Lower Scatter Upper Scatter General Scatter WL Compton's Scatter Window Group A OK Cancel Window Group 9000 Window Group C 8000 7000 Window Group D 6000 Ints 8. Enter in the Window Center (keV) and Window Width (%). If you are not making a Lower Scatter window, skip to step 12. 9. For lower Scatter for CTAC, select Window Group B, and click on the Add Energy Window icon. 10. Select Lower Scatter, and choose A1 as Parent in the drop-down. 11. Enter the name of the preset under New Preset Name. Please be aware that spaces and special characters will be rejected. Recommend using underscores instead of spaces. 12. Click OK. 13. Select Save Preset. Siemens Healthineers Services Page 2 of 3 Please note that the learning material is for training purposes only! For the proper use of the software or hardware, please always use the Operator Manual or Instructions for Use (hereinafter collectively “Operator Manual”) issued by Siemens Healthineers. This material is to be used as training material only and shall by no means substitute the Operator Manual. Any material used in this training will not be updated on a regular basis and does not necessarily reflect the latest version of the software and hardware available at the time of the training. The Operator's Manual shall be used as your main reference, in particular for relevant safety information like warnings and cautions. Note: Some functions shown in this material are optional and might not be part of your system. Certain products, product related claims or functionalities (hereinafter collectively “Functionality”) may not (yet) be commercially available in your country. Due to regulatory requirements, the future availability of said Functionalities in any specific country is not guaranteed. Please contact your local Siemens Healthineers sales representative for the most current information. The reproduction, transmission or distribution of this training or its contents is not permitted without express written authority. Offenders will be liable for damages. All names and data of patients, parameters and configuration dependent designations are fictional and examples only. All rights, including rights created by patent grant or registration of a utility model or design, are reserved. Copyright © Siemens Healthcare GmbH ………………………………………………………… Siemens Healthineers Headquarters Siemens Healthcare GmbH Henkestr. 127 91052 Erlangen, Germany Telephone: +49 9131 84-0 siemens.com/healthineers Published by Siemens Healthcare GmbH © Siemens Healthcare GmbH, 2018