PEPconnect

Adding additional protocol with different topogram orientation

Adding additional protocol with different topogram orientation

Adding additional protocol with different topogram orientation CT SOMATOM go. Scenario: A customer would like to perform two studies with patient orientation as headfirst-supine (HF-S) using one topogram. The protocols are saved with different patient orientations. 1. Select first protocol. • Confirm the patient position is HF-S. Brain HF_SP (Adult) Proceed with scan workflow. ----- ------ 3.4 . Brain HF SP Confirms patient position 2. Add the next protocol with different topogram orientation. • Select desired protocol to append. • Deselect topogram so the already completed topogram will be used. • Choose OK to add the protocol and apply it to the existing exam. Topograns Brain FF SP Deselect topogram Protocol Brain - Copy RTP -nocahors stocks Topogram boephalus Scan modex cu Brain HF_SP Specs Dicare Apply protocol Protocol: Brain Multi Pluse - Copy Central marion.» -Scan miodes Non Contrast Brain Unrestricted 0 Published by Siemens Healthcare GmbH © Siemens Healthcare GmbH, 2020 SIEMENS Master Template Effective Date: 3/5/2020 | HOOD05162003074494 Job Aid Effective Date: 06/01/2020 | HOOD05162003087232 Healthineers Job Aid | Adding additional protocol with different topogram orientation Effective Date: 06/01/2020 | HOOD05162003087232 3. Confirmation of patient position to previous topogram ori- entation. • The change in patient position with the added protocol - Topogrum is noted in the taskflow area. Pabont position • Select “Cancel” to ignore the orientation saved in the Bran FF SP new protocol (FF-S) and apply the previous used orien- Reconstruction tation (HF-S). This will allow the use of the previous topogram for planning and keep the patient in the HF-S position. Note: If “confirm” is selected, you are telling the system you want to change the current patient position (HF-S) and proceed with the orientation saved in the new pro- tocol (FF-S). This would be the correct workflow if you were actually changing the patient’s position and wanted to use a new topogram for planning. Apply protocol Cancel Unrestricted 0 Published by Siemens Healthcare GmbH © Siemens Healthcare GmbH, 2020 SIEMENS Master Template Effective Date: 3/5/2020 | HOOD05162003074494 Job Aid Effective Date: 06/01/2020 | HOOD05162003087232 Healthineers Page 2 of 3 Job Aid | Adding additional protocol with different topogram orientation Effective Date: 06/01/2020 | HOOD05162003087232 Please note that the learning material is for training purposes only! For the proper use of the software or hardware, please always use the Operator Manual or Instructions for Use (hereinafter collectively “Operator Manual”) issued by Siemens Healthineers. This material is to be used as training material only and shall by no means substitute the Operator Manual. Any material used in this training will not be updated on a regular basis and does not necessarily reflect the latest version of the software and hardware available at the time of the training. The Operator's Manual shall be used as your main reference, in particular for relevant safety information like warnings and cautions. Note: Some functions shown in this material are optional and might not be part of your system. Certain products, product related claims or functionalities (hereinafter collectively “Functionality”) may not (yet) be commercially available in your country. Due to regulatory requirements, the future availability of said Functionalities in any specific country is not guaranteed. Please contact your local Siemens Healthineers sales representative for the most current information. The reproduction, transmission or distribution of this training or its contents is not permitted without express written authority. Offenders will be liable for damages. All names and data of patients, parameters and configuration dependent designations are fictional and examples only. All rights, including rights created by patent grant or registration of a utility model or design, are reserved. Copyright © Siemens Healthcare GmbH 2020 Siemens Healthineers Headquarters Siemens Healthcare GmbH Henkestr. 127 91052 Erlangen, Germany Phone: +49 9131 84-0 siemens-healthineers.com Unrestricted 0 Published by Siemens Healthcare GmbH © Siemens Healthcare GmbH, 2020 SIEMENS Master Template Effective Date: 3/5/2020 | HOOD05162003074494 Job Aid Effective Date: 06/01/2020 | HOOD05162003087232 Healthineers Page 3 of 3