PEPconnect

ANZAI Patient Setup Video

This video provides an overview for setting up the Anzai system.

Note: This video does not have audio.

SIEMENS Healthineers SIEMENS SIEMENS • SIEMENS Healthineers Gooo SIEMENS • Please note that the learning material is for training purposes only. Healthineers Healthineers For the proper use of the software or hardware, please always use the Operator Manual or Instructions for Use (hereinafter collectively Siemens Healthineers presents "Operator Manual") issued by Siemens Healthineers. This material is to be used as training material only and shall by no means substitute Biograph Visizon the Operator Manual. Any material used in this training will not be updated on a regular basis and does not necessarily reflect the latest Prerequisites: Anzai AZ-733Vl version of the software and hardware available at the time of the training. The Operator Manual shall be used as your main reference, in particular for relevant safety information like warnings and cautions. SIEMENS • Biograph mCT - Anzai system installed and connected Please note: Some functions shown in this material are optional and might not be part of your system. Patient Setup Certain products, product related claims or functionalities (hereinafter collectively "Functionality") may not (yet) be commercially available - Respiratory Gated scan protocol Loaded in your country. Due to regulatory requirements, the future availability of said Functionalities in any specific country is not guaranteed. Healthineers Biograph Visizon Please contact your local Siemens Healthineers sales representative for the most current information. 24 PET/CT The reproduction, transmission or distribution of this training or its contents is not permitted without express written authority. Offenders rpm rpm will be liable for damages. All names and data of patients, parameters and configuration dependent designations are fictional and examples only. 300.5 263.0 All rights, including rights created by patent grant or registration of a utility model or design, are reserved. @ Siemens Healthcare GmbH 2021 Insert Load Cell into Patient Belt. Place belt around patient's chest. Locate Load Cell over a position, Adjust proper signal level of the Load Cell by pulling belt tighter If the LED marked with TIGHT shows up, loosen the belt Sensor cable should point towards Sensor Port. Connect Load Cell at Patient Handling System. Observe the three LEDs at Load Cell Amplifier. Gantry Display-Panel.shows-breat ing curve, Gantry Display Panel shows brep!hing curve, STANDARD: for normally breathing patients Patient Belts and Load Cells (when the LED marked with LOOSE lights up, pull belt tighter). Respiratory Gated scans can be started. Respiratory Gated scans-can be started. espiratorßatedscans-cambæestarte espiratorßatedscanscanbæstarte DEEP: for deep breathing patients or looser around the patient. where reasonable pressure can be expected.

  • gate
  • gating
  • anzai
  • varian