Aptio® Automation (Inpeco) Competency Checklist

Aptio® Automation (Inpeco) Competency Checklist Once an employee has acquired the necessary knowledge and skills to perform basic operation tasks this checklist can be used to observe the employee perform the required tasks for their core job responsibilities and to document demonstrated competency. The observer places their initials and date beside the task when it is performed successfully. Successful completion for each task is determined by the facility. The standards used to evaluate can be documented in the “Criteria” section below. Use the area on the last page to record comments or areas of improvement. If necessary, the observer can record recommended next steps of action for areas of improvement or development opportunities. When all required tasks are completed, the supervisor and employee sign and date this document as a record of completion. Criteria - Standards for successful completion of each task (e.g. Accuracy, Time, Quality, etc.): Observer’s Initials and Completion Date Topic/Tasks System Overview Identify system components and their function Distinguish between the safety labels on the system Describe the main areas of the graphical user interface System Preparation Describe sample requirements Identify the system status and state Identify lanes on the IOM and their status Identify the status of the modules and analyzers Enable and disable a test Sample Processing Load and unload sample racks in the Input/Output Module Describe the sample processing sequence Perform a sample search Unload a sample tube from the system Daily and Weekly Maintenance Perform Daily maintenance Perform Weekly maintenance Monthly and As Needed Maintenance Perform Monthly maintenance Perform As Needed maintenance Troubleshooting Identify modules and instruments with warnings and errors Utilize guided error recovery Manage samples in Priority output Investigate exceptions Perform a controlled power shutdown and startup Quality # HILS1881 Effective Date: 06/09/2017 Page 1 of 2 SIEMENS siemens.com/healthineers Healthineers Aptio® Automation (Inpeco) Competency Checklist Comments Areas of Improvement Next Steps  Primary Operator  Secondary Operator has been trained on the above documented tasks Supervisor: Employee: Date: Quality # HILS1881 Effective Date: 06/09/2017 Page 2 of 2 SIEMENS siemens.com/healthineers Healthineers