PEPconnect

Aptio® Automation Open Centrifuge Cover

This video provides instructions on how to open the centrifuge cover on Aptio® Automation in order to perform maintenance.

In order to access the robot gripper, you must access the interior of the centrifuge module. The first step is to unlock the safety cover. To do so, turn the red nob on the centrifuge side panel, clockwise to the unlock position. Next, gently lift the cover until the latch on the cover locks in place. Remove the center Safety access panel. And place aside carefully grasp the front of the centrifuge robot and manually move the robot to the left side of the centrifuge module until it stops. Follow the procedure to clean the robot gripper.

AptioTM Automation Opening the Centrifuge Module Cover

  • track
  • aption
  • automaton