Aptio® Automation Universal Shaker Module Maintenance Job Aid

Universal Shaker Module Maintenance Aptio® Automation Monthly Maintenance Refer to the Aptio Automation Operations Manual when performing the following procedures. Clean the grippers Supplies needed: lint-free cloths, 0.1% sodium hypochlorite solution, hex tool, deionized water 1. Ensure the Universal Shaker Module is Off-line a. Select Overview b. Select Shaker c. Select Status d. Select Off-line e. Select Do Not Flush Ensure the Universal Shaker Module has stopped all movements before proceeding to the next step. 2. Remove the cover a. Loosen the screws securing the cover using the hex tool b. Set aside the screws and remove the cover 3. Remove all sample tubes, if present Published by Siemens Healthcare GmbH © Siemens Healthcare GmbH, 2019 SIEMENS Master Template Effective Date: 3/11/2019 | HOOD05162002998095 Healthineers Job Aid Effective Date: 12/16/2019 | HOOD05162003058480 Job Aid | Universal Shaker Module Maintenance Effective Date: 12/16/2019 | HOOD05162003058480 4. Clean the grippers inside and outside using a lint-free cloth lightly moistened with 0.1% sodium hypochlorite solution 5. Reinstall the cover, being careful to align the mounting pins and holes. Install and tighten the screws with the hex tool to secure the cover 6. Bring the module On-line a. Select Overview b. Select Shaker c. Select Status d. Select On-line and confirm Published by Siemens Healthcare GmbH © Siemens Healthcare GmbH, 2019 Page 2 of 3 Job Aid | Universal Shaker Module Maintenance Effective Date: 12/16/2019 | HOOD05162003058480 Please note that the learning material is for training purposes only! For the proper use of the software or hardware, please always use the Operator Manual or Instructions for Use (hereinafter collectively “Operator Manual”) issued by Siemens Healthineers. This material is to be used as training material only and shall by no means substitute the Operator Manual. Any material used in this training will not be updated on a regular basis and does not necessarily reflect the latest version of the software and hardware available at the time of the training. The Operator's Manual shall be used as your main reference, in particular for relevant safety information like warnings and cautions. Note: Some functions shown in this material are optional and might not be part of your system. Certain products, product related claims or functionalities (hereinafter collectively “Functionality”) may not (yet) be commercially available in your country. Due to regulatory requirements, the future availability of said Functionalities in any specific country is not guaranteed. Please contact your local Siemens Healthineers sales representative for the most current information. The reproduction, transmission or distribution of this training or its contents is not permitted without express written authority. Offenders will be liable for damages. All names and data of patients, parameters and configuration dependent designations are fictional and examples only. All rights, including rights created by patent grant or registration of a utility model or design, are reserved. Aptio is a registered trademark of Siemens Healthcare Diagnostics. Copyright © Siemens Healthcare GmbH 2019 ………………………………………………………… Siemens Healthineers Headquarters Siemens Healthcare GmbH Henkestr. 127 91052 Erlangen, Germany Telephone: +49 9131 84-0 siemens.com/healthineers Published by Siemens Healthcare GmbH © Siemens Healthcare GmbH, 2019 Page 3 of 3