PEPconnect

Aristos: syngo® Learning Mode

Aristos: syngo® Learning Mode step by step

Aristos: syngo® Learning Mode Radiography 1. Under the Scheduler select the Study Level of the exam. 2. Select Patient, Register to open the Registration Page. Eabord Transfer Edt EL F Export Fim Tosk CHIP Copy to Film Sheet NumEnr 3. Select the correct Study from the drop down list then select Exam. 4. Make the corresponding exposure i.e. Chest X- Ray, make one exposure at the wall bucky. 5. Close the patient and go to Options, Edit Regions/Studies… Auto Exposa Detector Calbration, 6. In the Study tab find the study in question; verify the study description/name is exactly the same and that they match the name sent from RIS. 7. Select RIS Match, and restart the system. RIS Match 8. Under the Scheduler, select the test patient via the Name Level and the correct exams should open. SIEMENS siemens.com/healthineers Healthineers Job Aid | Aristos: syngo® Learning Mode Effective Date: 8/17/2016 | 370 Please note that the learning material is for training purposes only! For the proper use of the software or hardware, please always use the Operator Manual or Instructions for Use (hereinafter collectively “Operator Manual”) issued by Siemens Healthineers. This material is to be used as training material only and shall by no means substitute the Operator Manual. Any material used in this training will not be updated on a regular basis and does not necessarily reflect the latest version of the software and hardware available at the time of the training. The Operator's Manual shall be used as your main reference, in particular for relevant safety information like warnings and cautions. Note: Some functions shown in this material are optional and might not be part of your system. Certain products, product related claims or functionalities (hereinafter collectively “Functionality”) may not (yet) be commercially available in your country. Due to regulatory requirements, the future availability of said Functionalities in any specific country is not guaranteed. Please contact your local Siemens Healthineers sales representative for the most current information. The reproduction, transmission or distribution of this training or its contents is not permitted without express written authority. Offenders will be liable for damages. All names and data of patients, parameters and configuration dependent designations are fictional and examples only. All rights, including rights created by patent grant or registration of a utility model or design, are reserved. Copyright © Siemens Healthcare GmbH ………………………………………………………… Siemens Healthineers Headquarters Siemens Healthcare GmbH Henkestr. 127 91052 Erlangen, Germany Telephone: +49 9131 84-0 siemens.com/healthineers Siemens Healthineers Services Page 2 of 2 © Siemens Healthcare GmbH, 2017