Aristos: Creating a New Region

Aristos: Creating a New Region Radiography 1. With the Browser closed, go to Options/Edit Regions/Studies. Options Help Maintenance. End Session. Auto Expose Configuration .. Service Auto Film Copy Image To Winnie Transfer Folder Detector Calibration. Tube Statistics Edit Regions/Studies Test Images 2. In the Regions tab, left click to select a Region similar to the one you would like to create. Regions Available Regions Extremeties Ortho SIEMENS Thorax 3. Select the create button. create 4. Type the Region Name and Description into each field. The field “names” do not have to match. Region Edit Overview Region Name Region Description SIEMENS siemens.com/healthineers Healthineers Job Aid | Aristos: Creating a New Region Effective Date: 8/17/2016 | 667 5. Verify the “Studies in Region” list:  If necessary, remove unwanted studies and add the correct studies from the “Study List”  To Add: highlight wanted studies in the “Study List” double click to add these. remove Studies in Region W Thorax p.a W Thorax lat T Thorax in lying pos. T Clavicle W Clavicle T Clavicle panorama W Clavicle panorama W Thorax 2 views W Claviculadoint Study List W Elbow joint 2 views W Forearm 2 views W Hand 3 views W Hand lat W Humerus 2 views W Os scaphoideum quartett W Ribs a.p. W Ribs oblique W Scapula W Scapula lat W Scapula lat N ., L. W Scapula peri.hum. W Schwedenstatus 1-2-3 Sh. W Shoulder joint a.p. W Shoulder joint axial W Shoulder joint trans. W Sternoclaviculargel W Sternum lat 6. Select Done. 7. Select “Save.” Save Siemens Healthineers Services Page 2 of 3 © Siemens Healthcare GmbH, 2017 Job Aid | Aristos: Creating a New Region Effective Date: 8/17/2016 | 667 Please note that the learning material is for training purposes only! For the proper use of the software or hardware, please always use the Operator Manual or Instructions for Use (hereinafter collectively “Operator Manual”) issued by Siemens Healthineers. This material is to be used as training material only and shall by no means substitute the Operator Manual. Any material used in this training will not be updated on a regular basis and does not necessarily reflect the latest version of the software and hardware available at the time of the training. The Operator's Manual shall be used as your main reference, in particular for relevant safety information like warnings and cautions. Note: Some functions shown in this material are optional and might not be part of your system. Certain products, product related claims or functionalities (hereinafter collectively “Functionality”) may not (yet) be commercially available in your country. Due to regulatory requirements, the future availability of said Functionalities in any specific country is not guaranteed. Please contact your local Siemens Healthineers sales representative for the most current information. The reproduction, transmission or distribution of this training or its contents is not permitted without express written authority. Offenders will be liable for damages. All names and data of patients, parameters and configuration dependent designations are fictional and examples only. All rights, including rights created by patent grant or registration of a utility model or design, are reserved. Copyright © Siemens Healthcare GmbH ………………………………………………………… Siemens Healthineers Headquarters Siemens Healthcare GmbH Henkestr. 127 91052 Erlangen, Germany Telephone: +49 9131 84-0 siemens.com/healthineers Siemens Healthineers Services Page 3 of 3 © Siemens Healthcare GmbH, 2017