ARTIS icono VE20 Overlay Reference Job Aid

header Overlay Reference ARTIS icono VE20, ARTIS pheno VE20 With Overlay Reference (Overlay Ref), you can overlay a reference image (inverted) to the live image or last image hold (LIH). The reference image is always inverted regardless of the set acquisition mode for example, also with CO2. Overlay Reference is an alternative to Roadmap with the advantage that motion artifacts do not interfere as much as for Roadmap. When Overlay Reference is active and a reference image has been stored, the reference image (inverted display) is superimposed on the current fluoroscopy image. You can set the reference image portion to a value between 0% and 100%. Safety information: • After applying the overlay image, using the first fluoro frames, check that the position of the overlayed image is matching with the live image, using anatomical landmarks. • Keep checking the accuracy throughout the Overlay workflow. Unrestricted Published by Siemens Healthcare GmbH © Siemens Healthcare GmbH, 2019 SIEMENS Master Template Effective Date: 3/11/2019 | HOOD05162002998095 Healthineers Job Aid Effective Date: 09/04/2019 | HOOD05162003033903 Job Aid | ARTIS icono VE20, ARTIS pheno VE20 Overlay Reference Effective Date: 09/04/2019 | HOOD05162003033903 Performing Overlay Reference 1. Tap RDMP & Overlay in the main menu of the touchscreen. ARTIS Examination Display C C-Arm Position Table Detector RDMP & Overlay Case Flows Tools Favorites ys. Pos. Case Flows Display Exam 2. Tap Overlay Ref. Overlay Ref Overlay Ref Roadmap Overlay 3D Appl. REF2 Adjust C-Arm to Ref2 REFI Ref1 follows C-Arm Ref2 follows C-Arm CH * Sys. Pos. Case Flows Display Exam Favorite 3. Tap Overlay Ref1 or Overlay Ref2. Overlay Ref - Overlay Ref1 Overlay Ref2 REF1 Adjust C-Arm to Ref1 REF2 Adjust C-Arm to Ref2 REFI Ref1 follows C-Arm REF 2 Ref2 follows C-Arm CH * Sys. Pos. Case Flows Display Exam Favorites • The display mode is changed to Overlay Reference, i.e. the overlay image is faded in the image on the Live segment. Unrestricted Published by Siemens Healthcare GmbH © Siemens Healthcare GmbH, 2019 Page 2 of 4 Job Aid | ARTIS icono VE20, ARTIS pheno VE20 Overlay Reference Effective Date: 09/04/2019 | HOOD05162003033903 4. You can change the degree of overlay for the current and subsequent fluoroscopy runs by deflecting the jog wheel. OK G o Defect the jog wheel away from you: increase overlay G OK o Deflect the jog wheel towards you: decrease overlay Unrestricted Published by Siemens Healthcare GmbH © Siemens Healthcare GmbH, 2019 Page 3 of 4 Job Aid | ARTIS icono VE20, ARTIS pheno VE20 Overlay Reference Effective Date: 09/04/2019 | HOOD05162003033903 Please note that the learning material is for training purposes only! For the proper use of the software or hardware, please always use the Operator Manual or Instructions for Use (herein- after collectively “Operator Manual”) issued by Siemens Healthineers. This material is to be used as training material only and shall by no means substitute the Operator Manual. Any material used in this training will not be updated on a regular basis and does not necessarily reflect the latest version of the software and hardware available at the time of the training. The Operator's Manual shall be used as your main reference, in particular for relevant safety information like warnings and cautions. Note: Some functions shown in this material are optional and might not be part of your system. Certain products, product related claims or functionalities (hereinafter collectively “Functionality”) may not (yet) be commercially available in your country. Due to regulatory requirements, the future availability of said Functionalities in any specific country is not guaranteed. Please contact your local Siemens Healthineers sales representative for the most current information. The reproduction, transmission or distribution of this training or its contents is not permitted without express written authority. Offenders will be liable for damages. All names and data of patients, parameters and configuration dependent designations are fictional and examples only. All rights, including rights created by patent grant or registration of a utility model or design, are reserved. Copyright © Siemens Healthcare GmbH 2019 ………………………………………………………… Siemens Healthineers Headquarters Siemens Healthcare GmbH Henkestr. 127 91052 Erlangen, Germany Telephone: +49 9131 84-0 siemens-healthineers.com Unrestricted Published by Siemens Healthcare GmbH © Siemens Healthcare GmbH, 2019 Page 4 of 4