ARTIS icono VE20 Touchscreen Table Movements Video
This video will demonstrate how to perform table movements using the touchscreen on the ARTIS icono VE20.
Welcome to the Artis Icono table movements with the touch screen video. In this video you will learn how to adjust the table position using the touchscreen of the pilot control module. Basic table movements can be released directly on the table control module. Additionally, movements can be released in the table menu on the touch screen. If your table is the standard table, you can adjust the table height from the table menu. If your table is the multi tilt table, you can adjust the table height and Additionally table tilt table cradle and table transversal. An lanja tude Inal movements. Use your finger to scroll through the menu options. Touch the required function. The respective sub menu opens. For example, when you touch the table tilt function, the respective sub menu opens. Touch and hold to Tilt head up. Or touch and hold to Tilt head down. To return the table to the zero degree position, touch and hold the centering function.
@ Siemens Healthcare GmbH, 2019 Please note that the learning material is for training purposes only! ARTIS icono For the proper use of the software or hardware, please always use the Operator Manual or Instructions for Use (hereinafter collectively "Operator Manual") issued by Siemens Healthineers. This material is to be SIEMENS used as training material only and shall by no means substitute the Operator Manual. Any material used in this training will not be updated on a regular basis and does not necessarily reflect the latest version of the software and hardware available at the time of the training. Table movements with the touchscreen Table Healthineers The Operator Manual shall be used as your main reference, in particular for relevant safety information like warnings and cautions. Note: Some functions shown in this material are optional and might not be part of your system. The ARTIS Table information in this material contains general technical descriptions of specifications and options as well The reproduction, transmission or distribution of this training or its contents is not permitted without 83 cm Longitudinal Height as standard and optional features that do not always have to be present in individual cases. Examination Display express written authority. Offenders will be liable for damages. Define as ROI C-Arm Position Table Certain products, product related claims or functionalities described in the material (hereinafter collectively All names and data of patients, parameters and configuration dependent designations are fictional Couple with Table "Functionality") may not (yet) be commercially available in your country. Due to regulatory requirements, and examples only. Detector RDMP & Overlay Block Table Bloc the future availability of said Functionalities in any specific country is not guaranteed. Please contact your Case Flows Tools Unlock Rotation Trable local Siemens Healthineers sales representative for the most current information. All rights, including rights created by patent grant or registration of a utility model or design, are reserved. 83 cm Transversal Block Transversal Favorites Sys. Pos, Case Display