ARTIS pheno VE20 Collimator Control Module (CCM) Video

Welcome to Artis Fino collimator control modules ccme video. This video will introduce you to the functions of the collimator control module. The collimator control module controls the placement of collimator blades, an wedge, filters, collimation and filters can be applied to reduce patient dose and improve image quality. There are two types of semi transparent filters, wedge filters and finger filters. The two joysticks at the top of the collimator control module can be used to apply the semi transparent filters. Use the joysticks to apply wedge filters. Deflect the left joystick from left to right to move in the left wedge filter. Deflect the right joystick from right to left to move in the right wedge filter. To rotate the wedge filter, deflect the filter away from you or to the side. When you release X Ray, the wedge filters are applied. To reset all filters and collimation, press the home key at the front of the collimator control module. To change the filter from the wedge filter to the finger filter, press the key in between the two joysticks. Collimate the image to reduce dose and improve image quality using the center joystick for collimation to collimate from side to side. Deflect the joystick left to right. To collimate from top to bottom, deflect the joystick towards you. When you activate X Ray, the collimation is applied on the image. To reset the collimation, press the joystick down.

@ Siemens Healthcare GmbH, 2020 Please note that the learning material is for training purposes only! For the proper use of the software or hardware, please always use the Operator Manual or Instructions for Use (hereinafter collectively "Operator Manual") issued by Siemens Healthineers. This material is to be ARTIS pheno SIEMENS used as training material only and shall by no means substitute the Operator Manual. Any material used in this training will not be updated on a regular basis and does not necessarily reflect the latest version of the software and hardware available at the time of the training. Healthineers LAO The Operator Manual shall be used as your main reference, in particular for relevant safety information Collimator control module like warnings and cautions. Note: Some functions shown in this material are optional and might not be part of your system. The The reproduction, transmission or distribution of this training or its contents is not permitted without information in this material contains general technical descriptions of specifications and options as well express written authority. Offenders will be liable for damages. as standard and optional features that do not always have to be present in individual cases. Certain products, product related claims or functionalities described in the material (hereinafter collectively All names and data of patients, parameters and configuration dependent designations are fictional "Functionality") may not (yet) be commercially available in your country. Due to regulatory requirements, and examples only. the future availability of said Functionalities in any specific country is not guaranteed. Please contact your All rights, including rights created by patent grant or registration of a utility model or design, are reserved. local Siemens Healthineers sales representative for the most current information.