Artis Systems Daily System Checks/Troubleshooting Job Aid

Daily System Checks/Troubleshooting Job Aid Artis Systems 1. Turn System On (1)  Make sure the on-site main switch is switched on and the emergency SHUTDOWN button is not active. (3) O O O O O (1) (2) (4) (5) 2. Unplug the wireless foot pedal 3. Test Fluoro and Acquisition 4. The imaging system keeps you continuously informed about the status of the system, check system messages on the message bar on the Exam Room/Control room monitors  If any message has “SC” on the message bar, contact the Siemens Service Center • 1-800-888-7436, ask for Technical Support, provide your Functional Location # 5. Perform safety checks, before each examination, check that all displays and signal lamps are functioning properly  Emergency STOP buttons, confirm all emergency stops are not pushed in STOP STOP STOP  System movements  Collision sensors  Radiation indicators  Image orientation, image rotation, collimation  FD input format/zoom factor 6. Confirm Block Movement and Block Radiation buttons are not active. 7. View and configure the Siemens Large screen display if applicable Published by Siemens Healthcare GmbH © Siemens Healthcare GmbH, 2018 SIEMENS Master Template: EFF Date 22 Aug 17 | HOOD/HILS HOOD05162002647849 Healthineers Jobaid: Effective Date: 11/14/2018 | HOOD/HILS HOOD05162002969521 Job Aid | Artis Systems Effective Date: 11/14/2108 | HOOD/HILS HOOD05162002969521 AT THE END OF THE DAY: 1. Shut System down-OPTIONS

  • Artis Systems Daily System Checks/Troubleshooting Job Aid