ArtPix EZ2GO v3.02: Reassigning an Existing Image to Another View and Post Processing Set

ArtPix EZ2GO v3.02: Reassigning an Existing Image to Another View and Post- Processing Set Radiography **This must be done before closing the current visit** 1. After acquiring the image under the wrong view, select the pencil icon next to the current view name. CHEST PA >10/2017 4:09:23 PM KV : 109.00 mAS : 5.00 DI : 2.3 EI : 504.418 Zoom x1.00 Flip Left-Right 2. Select the correct Body Part at the bottom, and then select the correct view name from the wheel of views on the right. Modify Image Protocol Protocols: LAT PA Body CHEST RIBS Ok ABDOMEN PELVIS STERNUM Im STERNOCLAVIC JTS 3. Press OK to reassign View name and re-process the image with the correct view. SIEMENS siemens.com/healthineers Healthineers Job Aid | ArtPix EZ2GO v3.02: Reassigning an Existing Image to Another View and Post- Processing Set Effective Date: 8/28/2017 | HOOD05162002646055 Please note that the learning material is for training purposes only! For the proper use of the software or hardware, please always use the Operator Manual or Instructions for Use (hereinafter collectively “Operator Manual”) issued by Siemens Healthineers. This material is to be used as training material only and shall by no means substitute the Operator Manual. Any material used in this training will not be updated on a regular basis and does not necessarily reflect the latest version of the software and hardware available at the time of the training. The Operator's Manual shall be used as your main reference, in particular for relevant safety information like warnings and cautions. Note: Some functions shown in this material are optional and might not be part of your system. Certain products, product related claims or functionalities (hereinafter collectively “Functionality”) may not (yet) be commercially available in your country. Due to regulatory requirements, the future availability of said Functionalities in any specific country is not guaranteed. Please contact your local Siemens Healthineers sales representative for the most current information. The reproduction, transmission or distribution of this training or its contents is not permitted without express written authority. Offenders will be liable for damages. All names and data of patients, parameters and configuration dependent designations are fictional and examples only. All rights, including rights created by patent grant or registration of a utility model or design, are reserved. Copyright © Siemens Healthcare GmbH ………………………………………………………… Siemens Healthineers Headquarters Siemens Healthcare GmbH Henkestr. 127 91052 Erlangen, Germany Telephone: +49 9131 84-0 siemens.com/healthineers Siemens Healthineers Services Page 2 of 2 © Siemens Healthcare GmbH, 2017