ArtPix EZ2GO v3.02 Setting Default Image Processing Sets

ArtPix EZ2GO v3.02 Setting Default Image Processing Sets Radiography 1. Adjust Image Processing Set to desired appearance on actual patient images. Note: Avoid using slide-bar settings. These cannot currently be set to default. 1 Common Tools CHEST AP 1 Enhancement: Annotation >"Image Processing Contrast 2 View Edit Bone details: Accept & Send v smooth ROI Note: In order to perform this function, log in as Super User or other profile with Permissions to make changes. 2. Select System Settings (1), expand the Study drop down (2), and then select Body Parts (3). ART . PIX -per user v Registration General DICOM Hospital Registration 2 Study Predefined Labels Examinations 3 Body Parts SIEMENS siemens.com/healthineers Healthineers Job Aid | ArtPix EZ2GO v3.02 Setting Default Image Processing Sets Effective Date: 8/28/2017 | HOOD05162002646057 3. Select Body Part (1), and then select the tab with the corresponding View (2). Adjust the Im- age Processing set to desired value (3), and press Save (4). Body Part ABDOMEN Views: AP UPRIGHT LAT PA CHEST KUB SUPINE 1 DECUB 2 Body Part Name View Name View Orientation ABDOMEN DECUB Portrait R Print Grid Mode SID (cm) Image Processing Set Without MA/Time 100 ABDOMEN AP 1 Body Part Location Patient kV MAS TEI 3 Body Labels group Infant 65 CO Child 70 8 Thin 75 10 Average 80 12.5 V 161 Obese 85 16 Save Reset Siemens Healthineers Services Page 2 of 3 © Siemens Healthcare GmbH, 2017 Job Aid | ArtPix EZ2GO v3.02 Setting Default Image Processing Sets Effective Date: 8/28/2017 | HOOD05162002646057 Please note that the learning material is for training purposes only! For the proper use of the software or hardware, please always use the Operator Manual or Instructions for Use (hereinafter collectively “Operator Manual”) issued by Siemens Healthineers. This material is to be used as training material only and shall by no means substitute the Operator Manual. Any material used in this training will not be updated on a regular basis and does not necessarily reflect the latest version of the software and hardware available at the time of the training. The Operator's Manual shall be used as your main reference, in particular for relevant safety information like warnings and cautions. Note: Some functions shown in this material are optional and might not be part of your system. Certain products, product related claims or functionalities (hereinafter collectively “Functionality”) may not (yet) be commercially available in your country. Due to regulatory requirements, the future availability of said Functionalities in any specific country is not guaranteed. Please contact your local Siemens Healthineers sales representative for the most current information. The reproduction, transmission or distribution of this training or its contents is not permitted without express written authority. Offenders will be liable for damages. All names and data of patients, parameters and configuration dependent designations are fictional and examples only. All rights, including rights created by patent grant or registration of a utility model or design, are reserved. Copyright © Siemens Healthcare GmbH ………………………………………………………… Siemens Healthineers Headquarters Siemens Healthcare GmbH Henkestr. 127 91052 Erlangen, Germany Telephone: +49 9131 84-0 siemens.com/healthineers Siemens Healthineers Services Page 3 of 3 © Siemens Healthcare GmbH, 2017