ArtPix - Maintaining Pre-defined Text Labels

ArtPix: Maintaining Pre-defined Text Labels XPRF The following job aid can be used to add, edit or delete “Predefined Labels” on the Artpix. 1.) Select the “Settings” icon. 2.) Use the drop down arrow to select “Predefined Labels” from the “Study Setting”. General - DICOM - Hospital - Registration Study Predefined Labels Examinations Body Parts 3.) To create a new “Text Group”, use the plus (+) button in the “Text Labels Groups” and en- ter the “Text Group Name” into the drop down. Press “OK” to create. General Predefined Text Labels DICOM Text Labels Groups + General Text Labels Hospital Registration General AP Study - Add text group Predefined Labels Text Group Name New Text Group Examinations Body Parts OK Cancel WETOTTI BLAMING SIEMENS Unrestricted 0 Published by Siemens Healthcare GmbH © Siemens Healthcare GmbH, 2020 Job Aid Effective Date: 05/21/2020 | HOOD05162003093410 Healthineers Job Aid | Maintaining Pre-defined text Effective Date: 05/21/2020 | HOOD05162003093410 4.) To “Add Text” to an existing group or the new group, select the group from the “Text La- bels Groups” list on the left and select the (+) icon in the “General Text Labels” on the right. Enter the new “Text” and click “OK” to add it to the existing group. General Predefined Text Labels X DICOM Text Labels Groups General Text Labels + - Hospital Registration General AP Study New Text Group Add text Predefined Labels Text new text in existing group Examinations Body Parts Ok Cance VWLIOTTI BLAMING 5.) If a “New Text Group” is created, add and save it under the appropriate “Body Parts”. 6.) Use the (+) icon to add new text, the pencil icon to modify existing text, or the trash can icon to delete text. SIEMENS Unrestricted 0 Published by Siemens Healthcare GmbH © Siemens Healthcare GmbH, 2020 Job Aid Effective Date: 05/21/2020 | HOOD05162003093410 Healthineers Page 2 of 3 Job Aid | Maintaining Pre-defined text Effective Date: 05/21/2020 | HOOD05162003093410 Please note that the learning material is for training purposes only! For the proper use of the software or hardware, please always use the Operator Manual or Instructions for Use (hereinafter co llectively “Operator Manual”) issued by Siemens Healthineers. This material is to be used as training material only and shall by no means substitute the Operator Manual. Any material used in this training will not be updated on a regular basis and does not necessarily reflect the latest version of the software and hardware available at the time of the training. The Operator's Manual shall be used as your main reference, in particular for relevant safety information like warnings and cautions. Note: Some functions shown in this material are optional and might not be part of your system. Certain products, product related claims or functionalities (hereinafter collectively “Functionality”) may not (yet) be commercially available in your country. Due to regulatory requirements, the future availability of said Functionalities in any specific country is not guaranteed. Please contact your local Siemens Healthineers sales representative for the most current information. The reproduction, transmission or distribution of this training or its contents is not permitted without express written auth ority. Offenders will be liable for damages. All names and data of patients, parameters and configuration dependent designations are fictional and examples only. All rights, including rights created by patent grant or registration of a utility model or design, are reserved. Copyright © Siemens Healthcare GmbH 2020 Siemens Healthineers Headquarters Siemens Healthcare GmbH Henkestr. 127 91052 Erlangen, Germany Phone: +49 9131 84-0 siemens-healthineers.com SIEMENS Unrestricted 0 Published by Siemens Healthcare GmbH © Siemens Healthcare GmbH, 2020 Job Aid Effective Date: 05/21/2020 | HOOD05162003093410 Healthineers Page 3 of 3