Body Coil 30 (Numaris X)

Body Coil 30 (Numaris X) syngo MR Systems with Numaris X The Body Coil 30 enables examinations of the upper body, abdomen/liver, pelvis and heart. The coil may be used in the head first or feet first orientation. It can be used as an anterior coil in combination with a spine coil as well as with several anterior coils for complete upper body exams. (2) (1) Coil plug (2) Coil element rows (clusters B1-B5) POSITIONING: 1. Always position the Body 30 so that the coil cables do NOT touch the patient’s head 2. Secure the cables with the cable holders in the elongated holes of the patient table 3. Secure the coil on the patient using belts with clips or belt around the patient and coil Restricted 1 Published by Siemens Healthcare GmbH © Siemens Healthcare GmbH, 2020 SIEMENS Master Template Effective Date: 3/5/2020 | HOOD05162003074494 Job Aid Effective Date: XX/XX/XXXX | HOOD/HILS Healthineers Job Aid | Body Coil 30 (Numaris X) Effective Date: 05/27/20 | HOODHOOD05162003092542 4. For slender patients or extremity exams, the coil can be rotated by 90 degrees 5. Align the laser-light localizer with the center of the region of interest 6. Start the measurement 7. Please refer to Operator Manual–Coils for further information, including cleaning guide- lines Restricted 1 Published by Siemens Healthcare GmbH © Siemens Healthcare GmbH, 2020 SIEMENS Master Template Effective Date: 3/5/2020 | HOOD05162003074494 Job Aid Effective Date: XX/XX/XXXX | HOOD/HILS Healthineers Page 2 of 3 Job Aid | Body Coil 30 (Numaris X) Effective Date: 05/27/20 | HOODHOOD05162003092542 Please note that the learning material is for training purposes only! For the proper use of the software or hardware, please always use the Operator Manual or Instructions for Use (hereinafter collectively “Operator Manual”) issued by Siemens Healthineers. This material is to be used as training material only and shall by no means substitute the Operator Manual. Any material used in this training will not be updated on a regular basis and does not necessarily reflect the latest version of the software and hardware available at the time of the training. The Operator's Manual shall be used as your main reference, in particular for relevant safety information like warnings and cautions. Note: Some functions shown in this material are optional and might not be part of your system. Certain products, product related claims or functionalities (hereinafter collectively “Functionality”) may not (yet) be commercially available in your country. Due to regulatory requirements, the future availability of said Functionalities in any specific country is not guaranteed. Please contact your local Siemens Healthineers sales representative for the most current information. The reproduction, transmission or distribution of this training or its contents is not permitted without express written authority. Offenders will be liable for damages. All names and data of patients, parameters and configuration dependent designations are fictional and examples only. All rights, including rights created by patent grant or registration of a utility model or design, are reserved. Copyright © Siemens Healthcare GmbH 2020 Siemens Healthineers Headquarters Siemens Healthcare GmbH Henkestr. 127 91052 Erlangen, Germany Phone: +49 9131 84-0 siemens-healthineers.com Restricted 1 Published by Siemens Healthcare GmbH © Siemens Healthcare GmbH, 2020 SIEMENS Master Template Effective Date: 3/5/2020 | HOOD05162003074494 Job Aid Effective Date: XX/XX/XXXX | HOOD/HILS Healthineers Page 3 of 3