CLEARstent Dynamic Acquistion workflow (VD10)

CLEARstent Dynamic Acquistion Workflow (VD10) Interventional Radiography: Cardiac Please refer to manual for complete system capability at www.siemenslearningcenter.com A CLEARstent Dynamic acquisition is performed in the following sequence: 1. Prepare the patient, stand, C-arm and table. 2. Perform a brief fluoroscopy: Press fluoro pedal of footswitch making sure balloon markers are displayed. O 3. Select a CLEARstent Dynamic acquisition program. CLEARstent 15 f/s Ready for CLEARstent acquisition is displayed. 4. Start acquisition: Press the exposure release button or pedal and keep it pressed.  Acquisition phase 1 takes place. At the beginning of phase 2, an injection indicator is displayed on the Live screen.  The message "Injection" is displayed.  5. Now inject the contrast medium manually. SIEMENS siemens.com/healthineers Healthineers Job Aid | CLEARstent Dynamic Acquistion Workflow (VD10) Effective Date: 09/08/2016 | Quality HOOD05162001121410 6. Stop acquisition when acquisition run is complete. 7. View the CLEARstent Dynamic scene. When processing of the CLEARstent Dynamic image has concluded: A CLEARstent reference image will be created, stored, and displayed on the active  reference screen.  If contrast medium is present in the images, a CLEARstent Dynamic scene will be created, stored, and displayed on the live screen, where the image will fade from 100% stent detail to 0% stent detail. CLEARstent Dynamic images can be zoomed and panned. Siemens Healthineers Services Page 2 of 3 Job Aid | CLEARstent Dynamic Acquistion Workflow (VD10) Effective Date: 09/08/2016 | Quality HOOD05162001121410 Please note that the learning material is for training purposes only! For the proper use of the software or hardware, please always use the Operator Manual or Instructions for Use (hereinafter collectively "Operator Manual") issued by Siemens Healthineers. This material is to be used as training material only and shall by no means substitute the Operator Manual. Any material used in this training will not be updated on a regular basis and does not necessarily reflect the latest version of the software and hardware available at the time of the training. The Operator's Manual shall be used as your main reference, in particular for relevant safety information like warnings and cautions. Note: Some functions shown in this material are optional and might not be part of your system. Certain products, product related claims or functionalities (hereinafter collectively "Functionality") may not (yet) be commercially available in your country. Due to regulatory requirements, the future availability of said Functionalities in any specific country is not guaranteed. Please contact your local Siemens Healthineers sales representative for the most current information. The reproduction, transmission or distribution of this training or its contents is not permitted without express written authority. Offenders will be liable for damages. All names and data of patients, parameters and configuration dependent designations are fictional and examples only. All rights, including rights created by patent grant or registration of a utility model or design, are reserved. Copyright @ Siemens Healthcare GmbH ...... ........... Siemens Healthineers Headquarters Siemens Healthcare GmbH Henkestr. 127 91052 Erlangen, Germany Telephone: +49 9131 84-0 siemens.com/healthineers Siemens Healthineers Services Page 3 of 3