Performing a Strip Test Job Aid
This job aid provides instructions on how to properly run a urinalysis test on your CLINITEK Advantus® Analyzer.
Sample Processing Preforming a Urinalysis Strip Test 1. Select the appropriate test strip 2. Check/change sequence number (if applicable) 3. Enter a Tech ID (if applicable) 4. Enter the Color and Clarity • Use the cycle keys on the Ready/Run screen • Default Color/Clarity values are YELLOW and CLEAR 5. Prepare the test strip for analysis • Completely immerse all of the reagent pads into the specimen • Immediately remove the test strip • Run the edge of the strip against the container when SEQ #: 00030 Calor Eby Que Jyzer) Clarity- foot reported) removing • Place the test strip onto the loading station with the reagent pads facing up • Place to the right of the push bar • Ensure the end of the strip is against the back wall SIEMENS Note: DO NOT blot the urine strips – this may affect results. GPE04001.005 Effective Date: 09/12/2014
- urinalysis strip test
- sample testing
- processing