CLINITEK Atlas® Automated Urine Chemistry Analyzer Competency Checklist

CLINITEK Atlas® Automated Urine Chemistry Analyzer Competency Checklist Once an employee has acquired the necessary knowledge and skills to perform basic operation tasks this checklist can be used to observe the employee perform the required tasks for their core job responsibilities and to document demonstrated competency. The observer places their initials and date beside the task when it is performed successfully. Successful completion for each task is determined by the facility. The standards used to evaluate can be documented in the “Criteria” section below. Use the area on the last page to record comments or areas of improvement. If necessary, the observer can record recommended next steps of action for areas of improvement or development opportunities. When all required tasks are completed, the supervisor and employee sign and date this document as a record of completion. Criteria - Standards for successful completion of each task (e.g. Accuracy, Time, Quality, etc.): Observer’s Initials and Completion Date Topic/Tasks System Overview Locate and identify the function of the system components Navigate the system software Calibration Identify the conditions under which the system will require a calibration Prepare the calibration materials Perform a calibration Review and print the calibration status List the steps to resolve common calibration errors Maintenance Perform the Daily Maintenance Tasks Perform the Periodic Maintenance Tasks Describe the As Needed Maintenance Tasks Quality # HILS1935 Effective Date: 06/09/2017 Page 1 of 2 SIEMENS Healthineers siemens.com/healthineers CLINITEK Atlas® Automated Urine Chemistry Analyzer Competency Checklist Comments Areas of Improvement Next Steps  Primary Operator  Secondary Operator has been trained on the above documented tasks Supervisor: Employee: Date: Quality # HILS1935 Effective Date: 06/09/2017 Page 2 of 2 SIEMENS Healthineers siemens.com/healthineers