CLINITEK® AUWi™ PRO Automated Urine Workstation Competency Checklist

CLINITEK® AUWi™ PRO Automated Urine Workstation Competency Checklist Once an employee has acquired the necessary knowledge and skills to perform basic operation tasks this checklist can be used to observe the employee perform the required tasks for their core job responsibilities and to document demonstrated competency. The observer places their initials and date beside the task when it is performed successfully. Successful completion for each task is determined by the facility. The standards used to evaluate can be documented in the “Criteria” section below. Use the area on the last page to record comments or areas of improvement. If necessary, the observer can record recommended next steps of action for areas of improvement or development opportunities. When all required tasks are completed, the supervisor and employee sign and date this document as a record of completion. Criteria - Standards for successful completion of each task (e.g. Accuracy, Time, Quality, etc.): Observer’s Initials and Completion Date Topic/Tasks CLINITEK Novus™ System Overview Locate and identify the function of the system components Navigate the system software CLINITEK Novus™ Calibration Prepare the system for calibration Prepare the calibration materials Identify the steps to perform calibration Locate and review the calibration report CLINITEK Novus™ Quality Control Identify the steps to prepare the controls Perform a QC run on the system Review and print the QC results CLINITEK Novus® Maintenance Perform the daily maintenance tasks Describe the periodic maintenance tasks Describe the as needed maintenance tasks Sysmex UF-1000i™ System Overview Locate and identify the function of the system components Navigate the system software Identify parameters reported by the system Sysmex UF-1000i™ Quality Control Prepare control material Perform quality control analysis Review quality control results Sysmex UF-1000i™ Maintenance Perform the Daily Maintenance Tasks Perform Monthly Maintenance Perform the As Needed Maintenance Tasks Describe Reagent Management Urinalysis WAM Software Overview Locate and open WAM Utilize the software navigation options Quality # HILS1928 Effective Date: 06/09/2017 Page 1 of 2 SIEMENS Healthineers siemens.com/healthineers CLINITEK® AUWi™ PRO Automated Urine Workstation Competency Checklist Identify the functions available in Query WAM Results Management Identify the options for reviewing and validating sample results Create workorders Locate unregistered samples Comments Areas of Improvement Next Steps  Primary Operator  Secondary Operator has been trained on the above documented tasks Supervisor: Employee: Date: Quality # HILS1928 Effective Date: 06/09/2017 Page 2 of 2 SIEMENS Healthineers siemens.com/healthineers