CLINITEK Novus® Analyzer Installing the SG Sensor

install the new SG sensor, begin by sliding the SG sensor facing up into the sensor. Well until you hear a click. Select next hold the sensor connectors in one hand while hooking each sensor cable into the clips. And then select next. Attach each connector by holding the connector color and aligning the tab to the slot in its matching color socket and pushing the collar down and turning it clockwise 1/4 turn. Repeat these steps for the four remaining connectors. Confirm the connector is locked by gently trying to lift the connector. And then select done. Close the system cover and then wait one hour while the system is hydrating the SG sensor. After hydration is complete, calibrate the system.

Installing The SG Sensor