CLINITEK Status® Portfolio Competency Checklist

CLINITEK Status® Portfolio Competency Checklist Once an employee has acquired the necessary knowledge and skills to perform basic operation tasks this checklist can be used to observe the employee perform the required tasks for their core job responsibilities and to document demonstrated competency. The observer places their initials and date beside the task when it is performed successfully. Successful completion for each task is determined by the facility. The standards used to evaluate can be documented in the “Criteria” section below. Use the area on the last page to record comments or areas of improvement. If necessary, the observer can record recommended next steps of action for areas of improvement or development opportunities. When all required tasks are completed, the supervisor and employee sign and date this document as a record of completion. Criteria - Standards for successful completion of each task (e.g. Accuracy, Time, Quality, etc.): Observer’s Initials and Completion Date Topic/Tasks hCG Cassette Test Analyze a patient sample using an hCG Cassette Recall stored hCG results Urinalysis Strip Test Analyze a patient quick strip test Analyze a patient full strip test Recall stored patient strip test results Maintenance Clean exterior of analyzer Clean Test Table Insert Clean Test Table Examine Calibration Bar Urinalysis Quality Control Strip Test Perform Urinalysis Quality Control Strip Testing hCG Quality Control Cassette Test Perform hCG Quality Control Cassette Test Analyzer Customization Access screens to customize and view system settings Analyzer Setup Identify hardware components Connect System Overview Complete component identification worksheet Order the steps to update the analyzer to the CLINITEK Status® Connect System Enable connectivity through software interaction Quality # HILS1930 Effective Date: 06/09/2017 Page 1 of 2 SIEMENS Healthineers siemens.com/healthineers CLINITEK Status® Portfolio Competency Checklist Comments Areas of Improvement Next Steps  Primary Operator  Secondary Operator has been trained on the above documented tasks Supervisor: Employee: Date: Quality # HILS1930 Effective Date: 06/09/2017 Page 2 of 2 SIEMENS Healthineers siemens.com/healthineers