Control Panel mCT, Vision, & Vision Quadra Video

SIEMENS SIEMENS . Healthineers SIEMENS Healthineers SIEMENS SIEMENS Healthineers Healthin Healthineers Please note that the learning material is for training purposes only. For the proper use of the software or hardware, please always use the Operator Manual or Instructions for Use (hereinafter collectively Siemens Healthineers presents "Operator Manual") issued by Siemens Healthineers. This material is to be used as training material only and shall by no means substitute the Operator Manual. Any material used in this training will not be updated on a regular basis and does not necessarily reflect the latest Biograph mCT version of the software and hardware available at the time of the training. Gantry Control The Operator Manual shall be used as your main reference, in particular for relevant safety information like warnings and cautions. SIEMENS SIEMENS . Please note: Some functions shown in this material are optional and might not be part of your system. Panel 199.5 Biograph Vision -843.0 Certain products, product related claims or functionalities (hereinafter collectively "Functionality") may not (yet) be commercially available in your country. Due to regulatory requirements, the future availability of said Functionalities in any specific country is not guaranteed. Healthineers Healthinec Please contact your local Siemens Healthineers sales representative for the most current information. Biograph Vision Quadra PET/CT The reproduction, transmission or distribution of this training or its contents is not permitted without express written authority. Offenders will be liable for damages. All names and data of patients, parameters and configuration dependent designations are fictional and examples only. All rights, including rights created by patent grant or registration of a utility model or design, are reserved. @ Siemens Healthcare GmbH 2021 Move table int. Unload patient. Stop scan (E-Stop). Move table in. Store current table position to predefined position A (similar for B). Move table to predefined position A (similar for B). Set current horizontal table position as scan end position Move table from offset laser position into CT field of view. Set horizontal table position to zero. Move table out fast. Laser light marker Move table out. Start scan. Interrupt scan. (for PET guided exams).