PEPconnect

Customer Self Service Video - Part 2

This video iexplains you how you need to install and use the following devices:
  • Mouse
  • Paper roll holder
  • Wired Remote Control
  • Wireless Remote Control
No audio included.
Duration: 6:33

meduser ? Scan 2 Recon 6 Scan 2 = Recon 6 Scan 2 _ Recon 6 SIEMENS • SIEMENS - SIEMENS SIEMENS . Configuration Panel Configuration Pa Only for US: attach the DHHS label Battery status Healthineers SIEMENS C Tl 19052 C Tl I C 19052 F Remote Administration Portal Check up Installation Installations Assurance Configuration Config' Config Diagnose SOMA TOM go. Top, Site Information Remote Control Pairing Site Information Site Check up Remote Service Remote Control Service Not 183045 Service Customer Administrator For the proper use of the software or hardware, please always use the Operator Manual or Instructions for Use (hereinafter collectively Sy•ngo ASSiSt Administration Portal waiting Licensing Screen recorder Cxalibration go Top_de If applicable, attach the unique pairing The DHHS label must be adhered to systems installed in the USA The firmware update for the wireless RMC will start automatically Select one free DHHS label with the same country information as on the Remove the two caps from the table handle box. Check the country information on the DHHS label on the rear and Administration and the Operator Manual. Any material used in this training will not be updated on a regular basis and does not necessarily reflect the latest Material Nu Over 20 F Remote Remote Renote OICOM Nodes DICOM OICOM Modality labels on the new Remote Control and the version of the software and hardware available at the time of the training. gantry. Adhere it to the component in the location shown in the following after the wireless RMC receiver detects the wireless RMC. The X-ray intensity must be checked after the replacement NO Value, NO Value syngo Remote Assist SOMATOM go.Top SOMATOM DICOM Data Handling go.Top_de. 119052 --1 Screen recorder start button will light up (yellow) when the wireless RMC receiver The Operator Manual shall be used as your main reference, in particular for relevant safety information like warnings and cautions. Remote Assistance Two free DHHS labels (with different country information) are delivered Select one free DHHS label with the same country information as on the Off: Battery full Fast Fast Contact Quality picture Hardware Click to SIEMENS . SaveLog Remote Control Application is starting. Please wait... Cc • delivered with the system. 03 starts to update the firmware of the wireless RMC, and will switch off with DHHS-related components: Contact the Service support for this purpose Instrucations Installations Instructions Allow Remote Control old wired Remote Control Control Remote Computer Please note: Some functions shown in this material are optional and might not be part of your system. Disclaimer Instructions Remote Service Load Pack Paper roll holder Wireless Remote Control Allow Remote Control Switch off the system Wired Remote Control Wirew Remote Control ID Mouse Exam Designer when the update is finished. Normally, the firmware update will take Login with Service Key Import Service Key Charging condition (charging cable not connected): Certain products, product related claims or functionalities (hereinafter collectively "Functionality") may not (yet) be commercially available Create Screenshot in your country. Due to regulatory requirements, the future availability of said Functionalities in any specific country is not guaranteed. 32j6t Healthineers about three minutes. If the X-ray indicator is on continuously (more Fast Contact Please contact your local Siemens Healthineers sales representative for the most current information. Unattended Access before you start Tools: Phillips screw-driver and system Administrator password Tools: none This product complies with DHHS regulations transfer than five minutes), then the firmware update has failed; please (1) DHHS label • On (Yellow): Battery full charged 0160c3 Remember name 01600 0160c3 21 CFR Subchapter J,applicable at date of Calibration amination ation System Check Load Lock The reproduction, transmission or distribution of this training or its contents is not permitted without express written authority. Offenders setup SIEMENS • SIEMENS Take the new batteries Place the new Remote Control on Manufactured: Total Time: 20 minutes + Remote Control charging time Total Time: 15 minutes Total Time: 10 minutes to (2) Warning label will be liable for damages. • Fast Blinking 0.16s ON/O.16s OFF (Yellow): charging fault Connect the new wired Remote Disconnect the wired Remote Insert the paper roll holder into Disconnect mouse cable from Request remote support to Manufactured: manufacture.: Load Service Pack delivered with the new Remote Switch on the system and wait Install new mouse and connect Siemens Healthcare GmbH Siemens Shanghai Medical Equipment Ltd. SIEMENS Remote Support Required: NO Remote Support Required: YES (1) Cradle SAeARemote Off: no charging the monitor and remove old Swith on the system Control cable and remove the Control and attach it to the the handle box. The metal perform the final installation 278 ZhouZhu Road.201318 Shanghai China Henkestr. 127. 91052 Erlangen Germany & Con tads & Contacts LAN side (when facing the front of the SIEMENS • Control and install them in the for system standby Control Remove the batteries from the SIEMENS Go to Technical Configuration > Follow the steps given in the (2) Unique pairing label steps (Firmware Update) old wired Remote Control support should face the gantry cradle mouse Go to Administration Portal gantry) and switch ON the system SIEMENS . new Remote Control Wireless Remote Control Wirelows Remote Control Allow Remote Control old wireless Remote Control Wld wireless Remote Control Software Instructions Remote Control Pairing Healthineers @ Siemens Healthcare GmbH 2021 SIEMENS SIEMENS .. SIEMENS . (1) DHHS label (1) Caps Healthineers••. Healthineers HeaLthineers Healthineers • Heav System Check SIEMENS • SIEMENS . Healthineers

  • Mouse
  • Paper roll holder
  • Wired Remote Control
  • Wireless Remote Control
  • installation
  • devices