DCA Vantage® Analyzer Competency Checklist

DCA Vantage® Analyzer Competency Checklist Once an employee has acquired the necessary knowledge and skills to perform basic operation tasks this checklist can be used to observe the employee perform the required tasks for their core job responsibilities and to document demonstrated competency. The observer places their initials and date beside the task when it is performed successfully. Successful completion for each task is determined by the facility. The standards used to evaluate can be documented in the “Criteria” section below. Use the area on the last page to record comments or areas of improvement. If necessary, the observer can record recommended next steps of action for areas of improvement or development opportunities. When all required tasks are completed, the supervisor and employee sign and date this document as a record of completion. Criteria - Standards for successful completion of each task (e.g. Accuracy, Time, Quality, etc.): Observer’s Initials and Completion Date Topic/Tasks System Overview Identify System hardware components and their functions Identify Screen components Identify Symbols and buttons and their functions Hemoglobin A1c Sample Analysis Perform pre-sample handling Perform sample handling Perform sample analysis Microalbumin/Creatinine Sample Analysis Perform pre-sample handling Perform sample handling Perform sample analysis Hemoglobin A1c Calibration/Quality Control Perform Calibration for Hemoglobin A1c Recall HbA1c calibration Data Run Quality Control for HbA1c List the conditions for running HbA1c Quality Control Recall and print Hemoglobin A1c Quality Control Data Microalbumin/Creatinine Calibration/Quality Control Run Calibration for Microalbumin/Creatinine Recall and print Microalbumin/Creatinine Calibration Data Run Quality Control for Microalbumin/Creatinine List the conditions for running Microalbumin/Creatinine Quality Control Recall and print Microalbumin/Creatinine Quality Control Data Maintenance Power off the DCA Vantage® Analyzer Perform Weekly Maintenance tasks Perform Quarterly Maintenance tasks Perform As Needed Maintenance tasks Navigate and view information on the System Maintenance Status and System Maintenance Log screens HILS1931 Effective Date: 06/09/2017 Page 1 of 2 SIEMENS Healthineers siemens.com/healthineers DCA Vantage® Analyzer Competency Checklist Comments Areas of Improvement Next Steps  Primary Operator  Secondary Operator has been trained on the above documented tasks Supervisor: Employee: Date: HILS1931 Effective Date: 06/09/2017 Page 2 of 2 SIEMENS siemens.com/healthineers Healthineers