DynaPBV Body

DynaPBV Body Interventional Radiography: Vascular Please refer to manual for complete system capability at www.siemenslearningcenter.com. 1. Must select OGP: 5s Liver PBV. 2. Recommended to use Manual Triggering with 370mg/ml contrast diluted to 25% for a total volume of 35ml (9ml cm + 27ml saline) with injection rate of 3ml/s for a total acquisition time of 17s. Start injection at end of Mask Phase. start CM Scan Direction end CM Scan Direction mask Rotate back patient patient patient 5s Is 5s 1s 5s Contrast Media 12s (25%x36ml@3ml/s) Total scan time: ~17 sec 3. After acquisition, the volume is automatically reconstructed in the Inspace Task Card as colored MPR images. 4. Changing window width and window center will change the assignment of the PBV values to the colors. The color map will remain the same while the legend will be updated. SIEMENS siemens.com/healthineers Healthineers Job Aid | DynaPBV Body Effective Date: 09/06/2016 | Quality HOOD0516200893806 5. Using the Pixel Lens, you can determine the PBV values. You can evaluate the regions of interests (ROI) by drawing Pixel Statistics, Elliptical or Freehand. Siemens Healthineers Services Page 2 of 3 Job Aid | DynaPBV Body Effective Date: 09/06/2016 | Quality HOOD0516200893806 Please note that the learning material is for training purposes only! For the proper use of the software or hardware, please always use the Operator Manual or Instructions for Use (hereinafter collectively "Operator Manual") issued by Siemens Healthineers. This material is to be used as training material only and shall by no means substitute the Operator Manual. Any material used in this training will not be updated on a regular basis and does not necessarily reflect the latest version of the software and hardware available at the time of the training. The Operator's Manual shall be used as your main reference, in particular for relevant safety information like warnings and cautions. Note: Some functions shown in this material are optional and might not be part of your system. Certain products, product related claims or functionalities (hereinafter collectively "Functionality") may not (yet) be commercially available in your country. Due to regulatory requirements, the future availability of said Functionalities in any specific country is not guaranteed. Please contact your local Siemens Healthineers sales representative for the most current information. The reproduction, transmission or distribution of this training or its contents is not permitted without express written authority. Offenders will be liable for damages. All names and data of patients, parameters and configuration dependent designations are fictional and examples only. All rights, including rights created by patent grant or registration of a utility model or design, are reserved. Copyright @ Siemens Healthcare GmbH ...... ........... Siemens Healthineers Headquarters Siemens Healthcare GmbH Henkestr. 127 91052 Erlangen, Germany Telephone: +49 9131 84-0 siemens.com/healthineers Siemens Healthineers Services Page 3 of 3