Elara Max System Startup and Shutdown Job Aid

Elara Max System Startup and Shutdown XPRF Successful startup means that the system provides power to all system components. Keypad Variant for turning the system On and Off: 1) Press the On/Off button on the “Control and Display” panel to start the system. 1 1 2 3 4 5 6 8 9 O ED V 2) Enter the four-digit code to unlock the system on the keypad. The digits are displayed as asterisks in the mAs field on the “Control and Display” panel. This code is 1111 unless noted otherwise. 2 CODE STOP 3) To switch the system off, press the On/Off button on the “Control and Display”. Shutting down the system will close all open workflows. SIEMENS Unrestricted 0 Published by Siemens Healthcare GmbH © Siemens Healthcare GmbH, 2020 Job Aid Effective Date: 06/11/2020 | HOOD05162003100352 Healthineers Job Aid |System Startup and Shutdown Effective Date: 06/11/2020 | HOOD05162003100352 Key Switch Variant (optional): 1) The MOBILETT Elara Max can also be switched On or Off with an optional Key Switch. • Insert the key and turn to position ON to start the system. 2 • Turn the key to position O (OFF) to turn off the 1 system. O NOTE: Always set the key switch to position O or switch off completely using the ON/OFF button on the display panel when you are not using the MOBILETT Elara Max. Disconnecting the Power Cable: 1 1) Pull the power cable out of the wall outlet and briefly pull on the cable to trigger the auto- matic cable rewind. 2) Hold the power plug in one hand while the cable is rewinding. The power cable is wound up completely into the unit. SIEMENS Unrestricted 0 Published by Siemens Healthcare GmbH © Siemens Healthcare GmbH, 2020 Job Aid Effective Date: 06/11/2020 | HOOD05162003100352 Healthineers Page 2 of 3 Job Aid |System Startup and Shutdown Effective Date: 06/11/2020 | HOOD05162003100352 Please note that the learning material is for training purposes only! For the proper use of the software or hardware, please always use the Operator Manual or Instructions for Use (hereinafter co llectively “Operator Manual”) issued by Siemens Healthineers. This material is to be used as training material only and shall by no means substitute the Operator Manual. Any material used in this training will not be updated on a regular basis and does not necessarily reflect the latest version of the software and hardware available at the time of the training. The Operator's Manual shall be used as your main reference, in particular for relevant safety information like warnings and cautions. Note: Some functions shown in this material are optional and might not be part of your system. Certain products, product related claims or functionalities (hereinafter collectively “Functionality”) may not (yet) be commercially available in your country. Due to regulatory requirements, the future availability of said Functionalities in any specific country is not guaranteed. Please contact your local Siemens Healthineers sales representative for the most current information. The reproduction, transmission or distribution of this training or its contents is not permitted without express written auth ority. Offenders will be liable for damages. All names and data of patients, parameters and configuration dependent designations are fictional and examples only. All rights, including rights created by patent grant or registration of a utility model or design, are reserved. Copyright © Siemens Healthcare GmbH 2020 Siemens Healthineers Headquarters Siemens Healthcare GmbH Henkestr. 127 91052 Erlangen, Germany Phone: +49 9131 84-0 siemens-healthineers.com SIEMENS Unrestricted 0 Published by Siemens Healthcare GmbH © Siemens Healthcare GmbH, 2020 Job Aid Effective Date: 06/11/2020 | HOOD05162003100352 Healthineers Page 3 of 3