PEPconnect

FLC: Live Video Recording to a DVD

 FLC: Live Video Recording to a DVD step by step

FLC: Live Video Recording to a DVD Radiography 1. Insert a DVD into the DVD drive on the front of the Fluorospot Compact. The DVD drive is the lower of the 2 disk drives. Please note that DVD-R and DVD+R are the only formats that should be used. 2. In Patient Mode, before you User Message open the patient exam, a ! DUSs confirmation window will be Inserted DVD will now be Documentation displayed. Click “OK” to initialize initialized. Please wait a moment the DVD. H OK Cancel REF DVD 3. Now, chose your patient and open the exam. SIEMENS siemens.com/healthineers Healthineers Job Aid | FLC: Live Video Recording to a DVD Effective Date: 8/24/2016 | Quality 673 4. Once initialized, click the DVD Image Tools icon that appears on the Setup TUI(Touchscreen user interface) 50 in the room, or the “DVR 05/20 initialize” icon on the FLC imaging system. The button DVD should be bright white (as shown) when active. When recording is ready, Image Tools both of these buttons will be REE white (active) no matter DVD 14 which ONE you click. REF REF 5. Click this button to manually Image Took pause recording if needed. REF DVD = REF 6. Perform the exam. Recording will occur when radiation is released; it will automatically pause when radiation is not 1 Align tube being released. DVD symbol (shown) flashes when recording. OUD 0% hu 7. To finalize the DVD, switch from Examination mode to Patient mode > Examined Patients tab. Click the DVD icon.A confirmation window will appear. Click “OK” to finish. The DVD will then be finalized and ejected. Note: No additional images can be stored to a disk that has been finalized. Shutting down the system automatically finalizes the DVD. Siemens Healthineers Services Page 2 of 3 © Siemens Healthcare GmbH, 2017 Job Aid | FLC: Live Video Recording to a DVD Effective Date: 8/24/2016 | Quality 673 For the proper use of the software or hardware, please always use the Operator Manual or Instructions for Use (hereinafter collectively “Operator Manual”) issued by Siemens Healthineers. This material is to be used as training material only and shall by no means substitute the Operator Manual. Any material used in this training will not be updated on a regular basis and does not necessarily reflect the lates t version of the software and hardware available at the time of the training. The Operator's Manual shall be used as your main reference, in particular for relevant safety information like warnings and cautions. Note: Some functions shown in this material are optional and might not be part of your system. Certain products, product related claims or functionalities (hereinafter collectively “Functionality”) may not (yet) be commercially available in your country. Due to regulatory requirements, the future availability of said Functionalities in any specific country is not guaranteed. Please contact your local Siemens Healthineers sales representative for the most current information. The reproduction, transmission or distribution of this training or its contents is not permitted without express written authority. Offenders will be liable for damages. All names and data of patients, parameters and configuration dependent designations are fictional and examples only. All rights, including rights created by patent grant or registration of a utility model or design, are reserved. Copyright © Siemens Healthcare GmbH ………………………………………………………… Siemens Healthineers Headquarters Siemens Healthcare GmbH Henkestr. 127 91052 Erlangen, Germany Telephone: +49 9131 84-0 siemens.com/healthineers Siemens Healthineers Services Page 3 of 3 © Siemens Healthcare GmbH, 2017