PEPconnect

FLC PEX Enhanced MFields for the Multitom RAX

This job aid will cover the different options for MField selection on the Multitom RAX and how to change them in the PEX Editor.

FLC PEX: Enhanced MField for RAX XPRF To create a stand position that requires the detector to be placed with the chin cutout on the bot- tom consider changing which AEC cells are selected. The top and bottom cells will now be switched. 1. Select the the “Settings” subtask card on the “Patient” tab. Select the “PEX Editor” icon and log in. Patient Settings Service EXI 2. In the “Exam” tab on the left, select the “OGP View” for which the cell selections need to be changed. Exam Organ Program OGP View Scan FullSpine lat (d) Scan FullSpine lat paed (d) Scan LongLegs (d) T Abdomen, lying position a.p. (d) T AC joint a.p. L (d) T AC joint a.p. R (d) T Ala-Exposure 45º L (d) T Ala-Exposure 45º R (d) T Ankle a.p. L (d) T Ankle a.p. R (d) T Ankle lat L (d) T Ankle lat R (d) T Ankle stress view exp. a.p. L (d) T Ankie stress view exp. a.p. R (d) T Ankle stress view exp. lat L (d) T Ankle stress view exp. lat R (d) A- Group by O Name Body Part Acq. type 3. Double click on the OGP or select the “Organ Program” tab. SIEMENS Unrestricted 0 Published by Siemens Healthcare GmbH © Siemens Healthcare GmbH, 2020 Job Aid Effective Date: 08/11/2020 | HOOD05162003117811 Healthineers Job Aid | FLC PEX: Enhanced Mfield Effective Date: 08/11/2020 | HOOD05162003117811 4. In the “Organ Programs” tab, under the “X-ray Parameters” section, find the “Enhanced MField” and place a check mark in the associated box. From the drop down select the cor- rect orientation. Exam Organ Program Body Part Examined ABDOMEN Program Name :n, lying position a.p. (d) Acquisition Mode DR RAD Acquisition Type Table X - Ray Parameters Imag Fluoro Program Set none Auf MFiel 101 A Enhanced MField # 180º pt 0º O1 pt w Gn O2 pt 2.+90º 15 O 3 pt 180º O 3 pt w si-90º Sp KV Ab MAS 180 (mirrored) O 5. Select “Store” to make the change permanent. SIEMENS Unrestricted 0 Published by Siemens Healthcare GmbH © Siemens Healthcare GmbH, 2020 Healthineers Page 2 of 3 Job Aid | FLC PEX: Enhanced Mfield Effective Date: 08/11/2020 | HOOD05162003117811 Please note that the learning material is for training purposes only! For the proper use of the software or hardware, please always use the Operator Manual or Instructions for Use (hereinafter co llectively “Operator Manual”) issued by Siemens Healthineers. This material is to be used as training material only and shall by no means substitute the Operator Manual. Any material used in this training will not be updated on a regular basis and does not necessarily reflect the latest version of the software and hardware available at the time of the training. The Operator's Manual shall be used as your main reference, in particular for relevant safety information like warnings and cautions. Note: Some functions shown in this material are optional and might not be part of your system. Certain products, product related claims or functionalities (hereinafter collectively “Functionality”) may not (yet) be commercially available in your country. Due to regulatory requirements, the future availability of said Functionalities in any specific country is not guaranteed. Please contact your local Siemens Healthineers sales representative for the most current information. The reproduction, transmission or distribution of this training or its contents is not permitted without express written auth ority. Offenders will be liable for damages. All names and data of patients, parameters and configuration dependent designations are fictional and examples only. All rights, including rights created by patent grant or registration of a utility model or design, are reserved. Copyright © Siemens Healthcare GmbH 2020 Siemens Healthineers Headquarters Siemens Healthcare GmbH Henkestr. 127 91052 Erlangen, Germany Phone: +49 9131 84-0 SIEMENS Unrestricted 0 Published by Siemens Healthcare GmbH © Siemens Healthcare GmbH, 2020 Healthineers Page 3 of 3