FLC: Restoring a PEX Backup

FLC: Restoring a PEX Backup Step by Step

FLC: Restoring a PEX Backup Radiography 1. Open PEX Editor. Padent Seedogs Service ? 2. Log into the PEX Editor under Siemens, and select Configuration the Configuration Tab. 3. Click Restore/Import. Restore / Import 4. The Back-Up can be Database backup X restored from the system Select a device to store the backup Devices via the C/D drive or USB. Devices CAPEX backup . DAAPEX_Dackup Select the appropriate @[email protected] C:\PEX_backup EAPEX_backup FAPEX_backup drive, and click the plus sign beside the selected Note: If you uncheck the box for “Restore Stand Positions” the drive. Select the correct current positions in the room will not be replaced (this would be file to be restored. the typical option). Restore Stand Positions Assure data consistency (may take some minutes) 5. Click Go. A message will appear “Successful Go Close backup click OK”. 6. Click OK, and close out of the PEX Editor. SIEMENS Healthineers Job Aid | FLC: Restoring a PEX Backup Effective Date: 06/14/2017 | Quality HOOD05162002609394 Please note that the learning material is for training purposes only! For the proper use of the software or hardware, please always use the Operator Manual or Instructions for Use (hereinafter collectively “Operator Manual”) issued by Siemens Healthineers. This material is to be used as training material only and shall by no means substitute the Operator Manual. Any material used in this training will not be updated on a regular basis and does not necessarily reflect the latest version of the software and hardware available at the time of the training. The Operator's Manual shall be used as your main reference, in particular for relevant safety information like warnings and cautions. Note: Some functions shown in this material are optional and might not be part of your system. Certain products, product related claims or functionalities (hereinafter collectively “Functionality”) may not (yet) be commercially available in your country. Due to regulatory requirements, the future availability of said Functionalities in any specific country is not guaranteed. Please contact your local Siemens Healthineers sales representative for the most current information. The reproduction, transmission or distribution of this training or its contents is not permitted without express written authority. Offenders will be liable for damages. All names and data of patients, parameters and configuration dependent designations are fictional and examples only. All rights, including rights created by patent grant or registration of a utility model or design, are reserved. Copyright © Siemens Healthcare GmbH ………………………………………………………… Siemens Healthineers Headquarters Siemens Healthcare GmbH Henkestr. 127 91052 Erlangen, Germany Telephone: +49 9131 84-0 Siemens Healthineers Services Page 2 of 2 © Siemens Healthcare GmbH, 2017