FLC Storing a Fluoroloop
This Step by Step will guide Users on the process to store a Fluoroloop if this
option was purchased.
FLC: Storing a Fluoroloop XPRF 1. While using Fluoro a bar graph will display indicating the current scene length. This is seen under the “Fluoro” subtask card with in the “Examination” tab. Note: The available length to store with in a loop is determined by the number of pulses per second utilized. As pules per second is decreased the number of seconds that can be saved is increased. 1.9 S O 2. To save the Fluoroloop for future use, the “Store Fluoroloop” button on the DIT, TUI or FLC must be engaged when the user stops engaging Fluoro. 105 cm /1-90º IP -:4/4 !#40x40 cm Exam Set 5 Fluoro Program + Image Tools Setup 79 9.2 56 80 3.5 ? Ready Note: Failing to store the loop before releasing Fluoro again will result in the loop not storing. Additionally, failing to wait until the entire loop is stored will result in a partial save. SIEMENS siemens.com/healthineers Healthineers Job Aid | Storing a FluoroLoop Effective Date: 11/29/2018 | Quality HOOD05162002976790 3. Once stored the saved Fluoroloop can be found in the “Documentation” tab. The loops may need to be marked to send to PACS (system dependent). D SL 4 15/15 Documentation Siemens Healthineers Services Page 2 of 3 © Siemens Healthcare GmbH, 2017 Job Aid | Storing a FluoroLoop Effective Date: 11/29/2018 | Quality HOOD05162002976790 Disclaimers*: Please note that the learning material is for training purposes only! For the proper use of the software or hardware, please always use the Operator Manual or Instructions for Use (hereinafter collectively “Operator Manual”) issued by Siemens Healthineers. This material is to be used as training material only and shall by no means substitute the Operator Manual. Any material used in this training will not be updated on a regular basis and does not necessarily reflect the latest version of the software and hardware available at the time of the training. The Operator's Manual shall be used as your main reference, in particular for relevant safety information like warnings and cautions. Note: Some functions shown in this material are optional and might not be part of your system. Certain products, product related claims or functionalities (hereinafter collectively “Functionality”) may not (yet) be commercially available in your country. Due to regulatory requirements, the future availability of said Functionalities in any specific country is not guaranteed. Please contact your local Siemens Healthineers sales representative for the most current information. The reproduction, transmission or distribution of this training or its contents is not permitted without express written authority. Offenders will be liable for damages. All names and data of patients, parameters and configuration dependent designations are fictional and examples only. All rights, including rights created by patent grant or registration of a utility model or design, are reserved. Copyright © Siemens Healthcare GmbH ………………………………………………………… Siemens Healthineers Headquarters Siemens Healthcare GmbH Henkestr. 127 91052 Erlangen, Germany Telephone: +49 9131 84-0 siemens.com/healthineers Siemens Healthineers Services Page 3 of 3 © Siemens Healthcare GmbH, 2017