PEPconnect

Inspecting and Cleaning the Probes and Mixer Impellers on the Atellica® CH Analyzer Video Version 1.25 and Below

This video provides instructions on how to perform the monthly maintenance task of inspecting and cleaning the probes and mixer impellers on the Atellica® CH Analyzer.

This video will show you how to inspect and clean the atellica Ch analyzer probes and mixer impellers. This procedure should be completed on a monthly basis. The dilution an R2 probes, as well as both of the mixer impellers are accessible from the front of the analyzer, though sample in R1 probes are accessible from the back of the analyzer. In order to inspect and clean the mixer impellers and probes, the system needs to be put into diagnostic state. This can be done by selecting system in the command bar. Next, select operator diagnostics. Select the chemistry icon. Select enter diagnostics. Select yes wait for the system to enter diagnostic state and then in subsystems select inspect and clean. Select cleaning and inspecting the Ch probes and mixer impellers. Select perform. Select yes, wait for the analyzer to prepare for maintenance. The covers of the analyzer automatically unlock. Open the front and back covers of the Ch analyzer. Cover the Q vets with a paper towel to protect from debris. Locate an inspect the exterior of one of the probes. If appropriate, wipe off any debris on the probe with an alcohol pad or a lint free tissue dampened with alcohol. Repeat these steps for the remaining probes. Next, locate an. Inspect the two mixer impellers if appropriate. Wipe off any debris on the mixer impellers with an alcohol pad or a lint free tissue dampened with alcohol. Remove and discard the paper towels from the queue vets. Close the front and back covers of the Ch analyzer. Select continue in the software. Select exit diagnostics. Finally, select yes. To complete the procedure, select the maintenance tab in the command bar. Select schedule. Select the module in the drop down menu. Select cleaning and inspecting the Ch probes and mixer impellers in the menu. Select the mark as completed button located on the right hand side of the screen. This completes the overview of inspecting and cleaning the Ch probes and mixer impellers.

command bar,alcohol pad,back covers,select continue,front cover,ch probe,mixer impelers,ch ander,vvasher pr&,'hasher probes,operator diagnostics,reagent louse',exit diagnostics,ch prot*,probe stations,wxer imßllers,inspectmg ch,ch analyzer,washer prot*,cleaning protps,cting probes,reagent loader,cleaning ins•æcting,select cleaning,probes,reagent,enter,mixer

AtelLicae Atellicae Solution SIEMENS . SIEMENS Atellicae Atellicoe AtellicaZ Solution Version 1. sp00107 Version 1. 14.0.2983003 HeoLtnineers SIEMENS HeoLtnineers I ry O perator Diagnostics Operator Diagnostics Exit Diagnostics Operator 0 perator Diagnostics CH SH 11 1M System Subsystems c.P1.05 C+1.05 Module subsystems Diagnostic Name Oiagnosuic Name Description c-pt-os Confirmation Standby Cleaning the CHad Cleaning the Reagent Louse' Cleaning the Reagert Cleaning the Reagent Cleaning the Re agder Cleaning the Loader Cleaning the CH ander Cleanin the Washer Cleaning the Reager Cleaning the CHa Cleanim the Washer the Loader the the Reagent Louse' the Reagent Loader the Reagent Louse' the Reagent L the Loader Reagent Loader Perform Confirmation Perform: Cleaning and Inspecting the CH Probes and Mixer c-P1-05 Not Ole System Fw Cleaning the System Fluids Crawer the System Fluids Drawer Cleaning the Syster the System the System F System Fluids Drawer Capabilities Inspectng the Washer motes C!eaning Washer Prot* Cleaning Protps Cleanim the Washer Cleaning the Reagent Louse' Cleaning the Syster the VVasher Pr&s the 'hasher Probes Pr&s Cleaning Washe' P robes Cleaning Washer Prot* Cleaning Washer Prot*s Cleanin the Washer Clspeaning Washer Probes Cleaning Cleaning Washer Cleaning the Prs C!eaning the Washer Probes the Washer Prot*s the Washer the Loader c.pl.os CH Cleaning and Inspecting the CH Probes and Mixer Impellers: the Whasher Prot*es the VVasher Pr&s the Washer Prot*s Inspecting Washer Probes Inspectmng Washer Probes Clspeaning Washer Probes Inspecting Washer Prot— Inspecting Washer Prot—s Ins-æcting Probes Ins.ß-cting V%sher Insß-cting Probes Insß-cting the Ins-æcting VVasher Probes the Washer Pros Insß-cting the InsR-cting the Insß-cting Probes InsRcting the InsR-cbng the 'å'asher InsR-cbing the 'å'asher the Loader the the 'hasher Probes Perform: Cleaning and Inspecting the CH Probes and Mixer C!eaning and Inspecting the Probe Stations Cleaning and Inspecting the Stationes and Are you sure you want to eniter Ciagnostics? Are you sure you want to exiter Diagnostics? Are you sure you want to enter Ciagnostics? l. Refer to the Onlire help for the procedures: Cleaning CH Wash Impellers ? Cleaning and the Mixer and the CH and Mixer Impelers Cleaning and the CH Probes and Wxer and the CH Probes and Mixer Irnpelers Cleaning Ins•æcting the CH and Cleaning and Inspecting the CH and Wxer Imßllers and the CH and Mixer Irnpeleß Cleaning and the ProtæS Mixer and Inspectmg CH and Mixer C!eaning and the Mixer Impellers and CH and Mixer C!eaning and the Mixer Impellers and CH and Mixer Impelers C!eaning and the ProtæS Cleaning and Inspecting the Prot*S Mixer and Inspectmg CH and Mixer Impelers Cleaning and Inspecting the Probes Mixer Impellers Cleaning and Inspecting the CH Mixer Impelers Cleaning and Inspecting the CH Mixer Impellers Cleaning and Inspectmg CH and Mixer Cleaning and Inspecting the CH Probes arvd Mixer Impellets Cleaning and Inspectmg the CH and Mixer Impelers Cleaning and Inspecting the CH Mixer Impellers Cleaning and Inspecting CH and Mixer Cleaning and Ins•æcting the CH and Wxer Imßllers and the CH and Mixer Cleaning and the ProtæS Cleaning and the ProtæS ard Cleaning the Prsd Cleaning Protps Cleaning the CH ander Cleaning and Inspecting the CH Probes and Cleaning Ins•æcting the CH and Wxer and the CH and Mixer Cleaning the CH Cleaning and Inspecting the Prot*S Mixer and Inspectmg CH Mixer Impelers Probes, Inspecting CH Wash Probes, Cleaning the Exterior of the CH Probes, and Cleaning CH Mixing Impellers and Wash Stations. Cleaning and Inspecting the CH Probe WNash Stations Cleaning and Inspecting the Probe Stations Cleaning and Inspecting the Probes and Mixer Cleaning and Inspecting the CH Probes arx3 Cleaning and Insßcting the Prot*S C!eaning and Inspecting the Cleaning and Inspecting the Stationsa Cleaning and Inspecting the CH Probe b'ash Stations Cleaning and Inspecting the ProeStations Cleaning and Inspecting the CH Probe Wash Stations Cleaning and Inspecting the Stations Cleaning and Inspecting the Probe Wash Stations Cleaning and Inspecting the ',Vash Star Cleaning Ins•æcting the CH Prot* W Cleaning and Ins•æcting the CH Probe Wash Stationd Cleaning and Inspecting the CH Probes and Mixer Impeners Cleaning and the CH Prot* Cleaning and Inspecting the CH Probe Cleaning arx3 Ins•æcting the CH Prot* Cleaning arid Ins*ecting the CH Probe Wash Stations Cleaning and Ins*ecting the CH Probe Wash Stations and the Probe Wash Stations and Probe Wash Stations and Inspectmg the Prote Stations and Inspectmg the Prot* Stations 2. After completing the procedure, select Continue. the Connected to FCC Mixer Inspect and Ckan Insß-ct ant Clean InsR-ct ant Clean Inspect and Ckean Insßect ant Clean Yes NO No C." 1.05 Continue Yes 13.2018 No NO Completed Front Front Cover Back Cover Front Cover Enter Enter Ohgnostics Operator Diagnostics Enter Oh-gnostic s Enter Oägnostics Exit Exit Diagnostics Operator Diagnostics Thursday. 13, 2018 Thursday. 13.2018 Wednesday. 03, 2018 Wednesday. 03, 2018 1:4323 Wednesday. 03, 2018 1.4323 13.2018 13. 201B 03, 2018 1:4323 03, 20181.423 PEP Tuesday, July 10.2018