PEPconnect

MAMMOMAT Revelation: How to Adjust the Bounding Box on an Insight 2D and/or 3D

MAMMOMAT Revelation: How to Adjust the Bounding Box on an Insight 2D and/or 3D

How to Adjust the Bounding Box on an Insight 2D and/or Insight 3D MAMMOMAT Revelation 1. Select the desired image and click the “First View Icon” in the Tomo subtask card Images Tomo 1 Reconstr. available CC 2D+TOMO mio 8 2. The image will have a blue box around it. Bounding box SIEMENS siemens.com/healthineers Healthineers Job Aid | How to Adjust the Bounding Box on Insight 2D or 3D Effective Date: 02/19/2019 | Quality HOOD05162002989390 3. Click on the edge of the “Bounding Box” to activate sizing 4. Make the necessary adjustments 5. Click “Reconstruct” Reconstruct ... Delete Reconstruction Post processing Close patient 6. Select “EMPIRE” Reconstruction Parameter Group (RPG) from the drop down and check the box for Insight 2D and/or Insight 3D Reconstruction of scan Please select the reconstruction parameter group from the list for the selected scan (projection view: R-CC 2D+TOMO) and press OK. Reconstruction parameter group name: Empire Insight 2D Insight 3D! OK Cance If you acquired the Insight 2D or Insight 3D as part of the original image and want to add either, you must select both when reconstructing. 7. Click “Ok” Please note that the learning material is for training purposes only! Siemens Healthineers Services Page 2 of 3 © Siemens Healthcare GmbH, 2017 Job Aid | How to Adjust the Bounding Box on Insight 2D or 3D Effective Date: 02/19/2019 | Quality HOOD05162002989390 For the proper use of the software or hardware, please always use the Operator Manual or Instructions for Use (hereinafter collectively “Operator Manual”) issued by Siemens Healthineers. This material is to be used as training material only and shall by no means substitute the Operator Manual. Any material used in this training will not b e updated on a regular basis and does not necessarily reflect the latest version of the software and hardware available at the time of the training. The Operator's Manual shall be used as your main reference, in particular for relevant safety information like warnings and cautions. Note: Some functions shown in this material are optional and might not be part of your system. Certain products, product related claims or functionalities (hereinafter collectively “Functionality”) may not (yet) be commercially available in your country. Due to regulatory requirements, the future availability of said Functionalities in any specific country is not guaranteed. Please contact your local Siemens Healthineers sales representative for the most current information. The reproduction, transmission or distribution of this training or its contents is not permitted without express written authority. Offenders will be liable for damages. All names and data of patients, parameters and configuration dependent designations are fictional and examples only. All rights, including rights created by patent grant or registration of a utility model or design, are reserved. Copyright © Siemens Healthcare GmbH ………………………………………………………… Siemens Healthineers Headquarters Siemens Healthcare GmbH Henkestr. 127 91052 Erlangen, Germany Telephone: +49 9131 84-0 siemens.com/healthineers Siemens Healthineers Services Page 3 of 3 © Siemens Healthcare GmbH, 2017

  • MAMMOMAT Revelation: How to Adjust the Bounding Box on an Insight 2D and/or 3D