MAX System FLC Printer Setup
This Step by Step is designed to show the user how to set up the system for a default printer if needed.
MAX System FLC: Printer Setup NOTE: A network printer must be configured in Service first. 1. Open the User Settings, select DICOM Properties icon, and select the Printing Tab. DICOM Printing Properties 2. Under “Default Autofilm Camera”, select the desired printer from the dropdown and select “OK”. Default autofilm camera printer 3. Next, open the Image Display and Print Properties icon within the User settings, and select the Print Layout tab to define the print size/layout. Print Layout Image Display and Print Pr ... 4. Fill in the Name field, select “DICOM” for the type, and define all other fields to desired settings. Note: The word “Default” cannot be used for the “Name” field. Image layout Name cannot use default Type DICOM Size 14INx17IN Layout 1x1 Text size Standard Enlarge patient name SIEMENS siemens.com/healthineers Healthineers Job Aid Effective Date: 11/07/2017 | Quality HOOD05162002714142 5. To save the printer settings select the following Set As Default: Will set the printer settings as the default settings. Store: Will save the current settings over previous settings. Store As New: Will creat a new print layout. Note: If Storing for the first time select “Store As New” first and then “Set As default” in order to make the new layout the default layout. Set As Default Store Store As New Disclaimer Please note that the learning material is for training purposes only! For the proper use of the software or hardware, please always use the Operator Manual or Instructions for Use (hereinafter collectively “Operator Manual”) issued by Siemens Healthineers. This material is to be used as training material only and shall by no means substitute the Operator Manual. Any material used in this training will not be updated on a regular basis and does not necessarily reflect the latest version of the software and hardware available at the time of the training. The Operator's Manual shall be used as your main reference, in particular for relevant safety information like warnings and cautions. Note: Some functions shown in this material are optional and might not be part of your system. Certain products, product related claims or functionalities (hereinafter collectively “Functionality”) may not (yet) be commercially available in your country. Due to regulatory requirements, the future availability of said Functionalities in any specific country is not guaranteed. Please contact your local Siemens Healthineers sales representative for the most current information. The reproduction, transmission or distribution of this training or its contents is not permitted without express written authority. Offenders will be liable for damages. All names and data of patients, parameters and configuration dependent designations are fictional and examples only. All rights, including rights created by patent grant or registration of a utility model or design, are reserved. Copyright © Siemens Healthcare GmbH ……………………………………………………… Siemens Healthineers Headquarters Siemens Healthcare GmbH Henkestr. 127 91052 Erlangen, Germany Telephone: +49 9131 84-0 siemens.com/healthineers Siemens Healthineers Services Page 2 of 2