Mira Max Battery Care and Control Panel

This job aid will cover the battery and control panel

Battery Care and Control Panel Mira Max Battery charge indicators ~ U Mains operation LED: system is connected to mains power 0 6 Battery charge LED bars showing the current charge state of the system. - LEDs running from left to right show that the unit is currently charging up U From 6 to 2 bars: Unit is operable without restriction. Q 1 bar left: Only some exposures left. Connect system to mains power immediately. 0 0 bars left: - Red warning LED lights up - No exposures possible - Only some driving distance left. Connect system to mains power immediately. O After further discharge: - Error 225 is shown on the control and display panel. - System is switched off completely. - Detector in holder stops charging. - All LEDs are off. Connect system to mains power immediately. Connect system to mains power immediately. Low Battery Indicator Battery Indicator Bars Generator Ready Light Localizer Mains Operation Indicator STOP Exposure LED kV Settings mAs Settings Numeric Keypad Emergency Stop: Stops x-ray SIEMENS Stops drive Activates Screen saver Key for Operating Mode A=Analog D=Digital SIEMENS Healthineers Job Aid | Battery Care and Control Panel Effective Date: 04/12/2019 | Quality HOOD05162003006287 Please note that the learning material is for training purposes only! For the proper use of the software or hardware, please always use the Operator Manual or Instructions for Use (hereinafter collectively “Operator Manual”) issued by Siemens Healthineers. This material is to be used as training material only and shall by no means substitute the Operator Manual. Any material used in this training will not be updated on a regular basis and does not necessarily reflect the latest version of the software and hardware available at the time of the training. The Operator's Manual shall be used as your main reference, in particular for relevant safety information like warnings and cautions. Note: Some functions shown in this material are optional and might not be part of your system. Certain products, product related claims or functionalities (hereinafter collectively “Functionality”) may not (yet) be commercially available in your country. Due to regulatory requirements, the future availability of said Functionalities in any specific country is not guaranteed. Please contact your local Siemens Healthineers sales representative for the most current information. The reproduction, transmission or distribution of this training or its contents is not permitted without express written authority. Offenders will be liable for damages. All names and data of patients, parameters and configuration dependent designations are fictional and examples only. All rights, including rights created by patent grant or registration of a utility model or design, are reserved. Copyright © Siemens Healthcare GmbH Siemens Healthineers Headquarters Siemens Healthcare GmbH Henkestr. 127 91052 Erlangen, Germany Telephone: +49 9131 84-0 Siemens Healthineers Services Page 2 of 2 © Siemens Healthcare GmbH, 2017