Mira Max Common Error Codes and Warnings

This SBS provides the customer with common error codes to help them understand what needs to be done in order to proceed with the current process

Common Error Codes and Warnings Mira Max Error Cause Solution 194 Overheating of Capacitor Charging Unit Switch Off and wait for it to cool down 183 Tube Housing is too hot Switch Off and wait for it to cool down 205 Anode rotates for more than 15 seconds Make sure prep time of 15 sec- without radiation being released onds has not been exceeded. Release exposure button and press again. 209 Battery voltage too low. No exposures Charge the batteries by connect- possible ing system to main power supply 221 Exposure release button was released before the exposure was completed Image may not be optimal. Check the image and repeat if necessary by holding exposure switch down until acquisition is completed 225 Battery bank is not connected or fuse of battery bank has been blown Charge the batteries by connect- ing system to main power supply Note: If different error codes appear, reboot the system. If messages/warnings con- tinue to display, Service may need to be notified. SIEMENS Healthineers Job Aid | Common Error Codes/Warnings Effective Date: 02/27/2019 | Quality HOOD05162002996455 Please note that the learning material is for training purposes only! For the proper use of the software or hardware, please always use the Operator Manual or Instructions for Use (hereinafter collectively “Operator Manual”) issued by Siemens Healthineers. This material is to be used as training material only and shall by no means substitute the Operator Manual. Any material used in this training will not be updated on a regular basis and does not necessarily reflect the latest version of the software and hardware available at the time of the training. The Operator's Manual shall be used as your main reference, in particular for relevant safety information like warnings and cautions. Note: Some functions shown in this material are optional and might not be part of your system. Certain products, product related claims or functionalities (hereinafter collectively “Functionality”) may not (yet) be commercially available in your country. Due to regulatory requirements, the future availability of said Functionalities in any specific country is not guaranteed. Please contact your local Siemens Healthineers sales representative for the most current information. The reproduction, transmission or distribution of this training or its contents is not permitted without express written authority. Offenders will be liable for damages. All names and data of patients, parameters and configuration dependent designations are fictional and examples only. All rights, including rights created by patent grant or registration of a utility model or design, are reserved. Copyright © Siemens Healthcare GmbH ………………………………………………………… Siemens Healthineers Headquarters Siemens Healthcare GmbH Henkestr. 127 91052 Erlangen, Germany Telephone: +49 9131 84-0 Published by Siemens Healthcare GmbH © Siemens Healthcare GmbH, 2017