PEPconnect

Mira Max Line Visualization

This Step by Step will help guide user through the process of utilizing the Line
Visualization processing parameters, when needed. 

Line Visualization Mira Max 1. Select the image to enhance and open in Post-Processing Tab. 2. Select Rad Sub-Task Card and Select “Edge Enhancement Icon”. Use drop-down arrow and scroll down to bottom of list. Choose “Line Vis-HC” and select the blue check mark to apply changes. Process. Graphics Rad amination Postprocessing Auto-window Examination Process. Graphics Rad Auto-cropping 2.0 Auto Set black Auto-cropping n. Auto-window Postprocessing Set black as cropped Amplification Line Vis-HC Documentation Auto-window Postprocessing 12.0 dir ? Auto dfr 12 A Amplification dfr 13 12.0 dfr 14 Auto dfr 15 dfr 16 dfr 17 dfr 01 NR E Thorax pa fluoro Physics Do 02 Thorax po fluoro RM Line Vis-HC 3. a)To save a new image and not re- b) If the new image needs to be place the original, select the “Save” sent to PACS as well, select icon on the lower right of the monitor. the “Undo” icon. Tools Tools SIEMENS siemens.com/healthineers Healthineers . Job Aid | Line Visualization Effective Date: 04/12/2019 | Quality HOOD05162003006289 4. Select the Documentation tab and verify the stored image is selected. All images with a “white dot” in the upper left corner of the image are “selected” for sending. 5. To “Select” an image to send to PACs, from the Documentation tab, click on the “Select” sub task card and click the “Mark/Unmark single images” icon. Follow normal process for sending all marked images. amination Select Postprocessing Documentation Siemens Healthineers Services Page 2 of 3 © Siemens Healthcare GmbH, 2017 Please note that the learning material is for training purposes only! For the proper use of the software or hardware, please always use the Operator Manual or Instructions for Use (hereinafter collectively “Operator Manual”) issued by Siemens Healthineers. This material is to be used as training material only and shall by no means substitute the Operator Manual. Any material used in this training will not be updated on a regular basis and does not necessarily reflect the latest version of the software and hardware available at the time of the training. The Operator's Manual shall be used as your main reference, in particular for relevant safety information like warnings and cautions. Note: Some functions shown in this material are optional and might not be part of your system. Certain products, product related claims or functionalities (hereinafter collectively “Functionality”) may not (yet) be commercially available in your country. Due to regulatory requirements, the future availability of said Functionalities in any specific country is not guaranteed. Please contact your local Siemens Healthineers sales representative for the most current information. The reproduction, transmission or distribution of this training or its contents is not permitted without express written authority. Offenders will be liable for damages. All names and data of patients, parameters and configuration dependent designations are fictional and examples only. All rights, including rights created by patent grant or registration of a utility model or design, are reserved. Copyright © Siemens Healthcare GmbH ………………………………………………………… Siemens Healthineers Headquarters Siemens Healthcare GmbH Henkestr. 127 91052 Erlangen, Germany Telephone: +49 9131 84-0 siemens.com/healthineers Published by Siemens Healthcare GmbH © Siemens Healthcare GmbH, 2019