Mobile C-arms System Startup Video

Welcome to the system startup video for the CS Alpha and see a spin. In this video you will learn how to connect the C arm system with the monitor and the footswitch and how to perform system startup. Please note we will demonstrate all steps on a fully equipped CS PIN system. All steps can be performed on the CS Alpha as well. Before connecting the See ARM system with other components, ensure that the brakes of the C arm system are engaged using the steering lever. Additionally, ensure that the plugs and connectors are clean and dry. Do not use damaged cables. To connect the, see arm with the Monitor trolley. Plug the central plug into the socket on the left side of the C arm system. The switch must be in vertical position. Turn the central plug switch to the right until it locks into place. You can hear a clicking sound. Plug the monitor trolley power plug into an appropriate socket to establish the power connection of the system. Switch the system on by pressing the on button on the monitor trolley. The system automatically runs a self test. All LEDs on the control panel light up for approximately 2 seconds and switch off automatically. You can hear a signal during the system startup. An automatic self test is performed for the See Arm Control unit buttons do not press any key during this self test. During startup, a startup screen is displayed on the Left Monitor stating the current software version.

Press the Turn central plug ON button @ Siemens Healthcare GmbH, 2020 switch to the right Cios Alpha, Cios Spin Please note that the learning material is for training purposes only! For the proper use of the software or hardware, please always use the Operator Manual or Instructions for Use (hereinafter collectively "Operator Manual") issued by Siemens Healthineers. This material is to be used System Start Up as training material only and shall by no means substitute the Operator Manual. Any material used in this SIEMENS Spin training will not be updated on a regular basis and does not necessarily reflect the latest version of the 3D software and hardware available at the time of the training. The Operator Manual shall be used as your main reference, in particular for relevant safety information like Healthineers ' warnings and cautions. Note: Some functions shown in this material are optional and might not be part of your system. The The reproduction, transmission or distribution of this training or its contents is not permitted without information in this material contains general technical descriptions of specifications and options as well as 3D express written authority. Offenders will be liable for damages. standard and optional features that do not always have to be present in individual cases. Plug the 3D Certain products, product related claims or functionalities described in the material (hereinafter collectively All names and data of patients, parameters and configuration dependent designations are fictional and central plug in Plug the "Functionality") may not (yet) be commercially available in your country. Due to regulatory requirements, examples only. the future availability of said Functionalities in any specific country is not guaranteed. Please contact your central plug in central Plug in the power plug All rights, including rights created by patent grant or registration of a utility model or design, are reserved. local Siemens Healthineers sales representative for the most current information.