PEPconnect

Motion Correction for Dynamic Series

Motion Correction of a Dynamic Series Description: The purpose of this step by step is to assist you in performing motion correction on a dynamic series. 1. Select the desired series from the MI Apps Patient Browser and launch the desired processing workflow. 2. Select the Quality Control activity. 3. Select the desired series from the Series pull down menu. 4. Select the appropriate isotope from the Isotope pull down menu. 5. Click the Cine button button to observe the image motion. 6. If the series needs motion correction, click the Motion Correct Series button at the bottom of the page. 3. Select the Settings Correction desired dynamic Series: Renal Mag3 Before After Data Selector series % 44 Quality Control 2 Select the Quality Control activity Processing Flexible Display Hard Copy Sum Sum % % 5 Click the Cine button and Cine Play button 16 16 Quality Control Tools 4 Select the Suspen Unapply Correction isotope Complete 6. Motion Correct Series Detector: 1 Isotope: A Motion Correct Series. Revert to Original SIEMENS www.usa.siemens.com/healthcare Page 1 of 2 1387 Effective Date: 12/07/2016 7. Select between Single Frame Mode or Multiframe Mode. a. Single Frame Mode – Corrects motion in one frame b. Multiframe Mode – Corrects motion in frame selected and all the frames following. 8. Select the Cross Tool. 9. Position the reference lines to aid in visualizing the motion. 10. Select the Vertical Shift tool. 11. Locate the desired frame and reposition using a left mouse and dragging. 12. Review the cine, sinogram, and linogram to make sure the motion has been corrected to your satisfaction. 13. Click OK to finish. 8. Select the Crosshair 7. Select between Single Tool Frame or Multiframe Modes otion Correction Manual Manual Correction Single Frame Mode Sinogram Isotope: Multiframe Mode 10. Select the Vertical Shift 0 tool. Linogram 32 100 9. Position reference lines Sum 100 11. Select the desired frames and drag to reposition 0 X Shift Y Shift: 0,00 OK 12. Review the cine, sinogram and linogram 13. Select OK to finish. SIEMENS www.usa.siemens.com/healthcare Page 2 of 2