MR Combine Numaris X

BMR MR Combine Numaris X Combine is used for combining axials series into one series. 1. In the Viewing Step of MR View&GO, select the series that you want to combine 2. In the Favorite Tools area, select the New Combine icon Favorite Tools Show in Mean Cal- New New 3D Curve culation Compose Combine  Images are loaded into the Composer Step 3. In the Create New Combining dialog box, the selected series to be combined will be in the Selected Series column Create New Combining ? X Selected Series Available Series T1 TSE AXIAL_A.latest T1 TSE AXIAL_B.latest Image Preview Name Of Combined Series OK Cancel EMENS Published by Siemens Healthcare GmbH © Siemens Healthcare GmbH, 2018 Healthineers Effective Date: 12/17/2018 | HOOD05162002979853 4. Enter a name for the combined series 5. Select OK to start combining 6. To save combined images, select the corresponding series in the Case Navigator > select Confirm Result icon New New Confirm Compose Combine Result 7. The new series is saved. Published by Siemens Healthcare GmbH © Siemens Healthcare GmbH, 2018 Page 2 of 3 Effective Date: 12/17/2018 | HOOD05162002979853 Please note that the learning material is for training purposes only! For the proper use of the software or hardware, please always use the Operator Manual or Instruc- tions for Use (hereinafter collectively “Operator Manual”) issued by Siemens Healthineers. This material is to be used as training material only and shall by no means substitute the Operator Manual. Any material used in this training will not be updated on a regular basis and does not necessarily reflect the latest version of the software and hardware available at the time of the training. The Operator's Manual shall be used as your main reference, in particular for relevant safety information like warnings and cautions. Note: Some functions shown in this material are optional and might not be part of your system. Certain products, product related claims or functionalities (hereinafter collectively “Functionality”) may not (yet) be commercially available in your country. Due to regulatory requirements, the future availability of said Functionalities in any specific country is not guaranteed. Please contact your local Siemens Healthineers sales representative for the most current information. The reproduction, transmission or distribution of this training or its contents is not permitted without express written authority. Offenders will be liable for damages. All names and data of patients, parameters and configuration dependent designations are fictional and examples only. All rights, including rights created by patent grant or registration of a utility model or design, are reserved. Copyright © Siemens Healthcare GmbH 2018 ………………………………………………………… Siemens Healthineers Headquarters Siemens Healthcare GmbH Henkestr. 127 91052 Erlangen, Germany Telephone: +49 9131 84-0 siemens.com/healthineers Published by Siemens Healthcare GmbH © Siemens Healthcare GmbH, 2018 Page 3 of 3