MULTIX Impact: Correcting a RIS Mapping Error with Auto Mapping

MULTIX Impact: Correcting a RIS Mapping Error w/ Auto Mapping XPRF The following job aid can be used to remap an organ program (OGP) to an examination. Occasionally, the incorrect OGP can be mapped to an exam. To fix the mismatch between the examination and the OGP assigned to it, follow the process as described below. In this scenario the Chest PA ogp has been mapped to the Abdomen examination. • An abdomen exam has been ordered. ALICIA 4 169 Female 51Y ABDOMEN 4-8-1 • When the patient is selected and the “Examination” tab opens, the OGP assigned to Abdomen is a PA chest. OGP List Patient Chest PA Mode Examination Patient Size AEC Postprocessing S Focus 1. To fix a mismatch, log-in to the system as a “User” with access to the “Service” tab. 2. On the “Service” tab, select the “RIS Mapping” icon under “Tools” and log-in. Operation Tool OGP Editor Clean FD FD Archiv ... Calibration Reconnect RIS Mapping Statistics Audit Trail Test Image Tube Load SIEMENS Unrestricted 0 Published by Siemens Healthcare GmbH © Siemens Healthcare GmbH, 2020 Job Aid Effective Date: 04/30/2020 | HOOD05162003089716 Healthineers Job Aid |RIS Mapping Error with Auto Mapping Feature Effective Date: 04/30/2020 | HOOD05162003089716 3. On the “Configuration” tab in the “RIS Mapping Management” screen, select the body part on the avatar with the RIS mapping error. The OGP mapped to Abdomen is Chest PA. Se- lect the “Delete” button to remove the procedure. RIS Mapping Management X Configuration Batch Mapping Auto RIS mapping RIS mapping DICOM tag Apply Scheduled procedure step Requested procedure Protocol codes Adult Paediatric Procedure: By Order: ND ABDOMEN Delete OGP List Chest PA Cancel 4. The next time the examination is ordered it can be RIS mapped with the correct OGP. SIEMENS Unrestricted 0 Published by Siemens Healthcare GmbH © Siemens Healthcare GmbH, 2020 Job Aid Effective Date: 04/30/2020 | HOOD05162003089716 Healthineers Page 2 of 3 Job Aid |RIS Mapping Error with Auto Mapping Feature Effective Date: 04/30/2020 | HOOD05162003089716 Please note that the learning material is for training purposes only! For the proper use of the software or hardware, please always use the Operator Manual or Instructions for Use (hereinafter co llectively “Operator Manual”) issued by Siemens Healthineers. This material is to be used as training material only and shall by no means substitute the Operator Manual. Any material used in this training will not be updated on a regular basis and does not necessarily reflect the latest version of the software and hardware available at the time of the training. The Operator's Manual shall be used as your main reference, in particular for relevant safety information like warnings and cautions. Note: Some functions shown in this material are optional and might not be part of your system. Certain products, product related claims or functionalities (hereinafter collectively “Functionality”) may not (yet) be commercially available in your country. Due to regulatory requirements, the future availability of said Functionalities in any specific country is not guaranteed. Please contact your local Siemens Healthineers sales representative for the most current information. The reproduction, transmission or distribution of this training or its contents is not permitted without express written auth ority. Offenders will be liable for damages. All names and data of patients, parameters and configuration dependent designations are fictional and examples only. All rights, including rights created by patent grant or registration of a utility model or design, are reserved. Copyright © Siemens Healthcare GmbH 2020 Siemens Healthineers Headquarters Siemens Healthcare GmbH Henkestr. 127 91052 Erlangen, Germany Phone: +49 9131 84-0 siemens-healthineers.com SIEMENS Unrestricted 0 Published by Siemens Healthcare GmbH © Siemens Healthcare GmbH, 2020 Job Aid Effective Date: 04/30/2020 | HOOD05162003089716 Healthineers Page 3 of 3