MUlTIX Impact: Configuring Reject Reasons

MULTIX Impact: Configuring Reject Reasons XPRF The following job aid is used to “Add” or “Delete” “Reject Reasons” from the drop down field. 1.) On the “Service” tab, select the “Processing Properties” icon under “User Settings”. Operation Patient Tool OGP Editor Clean FD FD Archiv ... Calibration Reconnect RIS Statistics Audit Trail Test Image Mapping Examination Tube Load User Setting Site Info. General Processing Exam Setting Properties Properties Postprocessing Image Registe DICOM Disk Display Config. Properties Manager User Manager Service PMS Remote Remot DICOM View Assistance Access Node FD Manager Sensitivity Print LifeNet PEPconnect Service Mgr 11:50:06 SIEMENS Unrestricted 0 Published by Siemens Healthcare GmbH © Siemens Healthcare GmbH, 2020 Healthineers Job Aid Effective Date: 05/XX/2020 | HOOD0516200309 Job Aid | Configuring Reject Reasons Effective Date: 11/13/2020 | HOOD05162003145898 2.) Select the “Reject Reasons” tab to “Add” or “Delete” “Reject Reasons”. 3.) To add a new “Reject Reason”, enter the text in the “Add Reason” field and click the “Add” icon. The text is added to the “Reject Reasons” list as a new entry. Image Processing Properties X General Comments Reject Reasons Add Reason: New Reason Reject Reasons Positioning Artifact Patient Movement system failure Add Delete Close 4.) To “Delete” a “Reject Reason”, select an item in the “Reject Reasons” list and click the “Delete” icon. SIEMENS Unrestricted 0 Published by Siemens Healthcare GmbH © Siemens Healthcare GmbH, 2020 Job Aid Effective Date: 05/XX/2020 | HOOD0516200309 Healthineers Page 2 of 3 Job Aid | Configuring Reject Reasons Effective Date: 11/13/2020 | HOOD05162003145898 Please note that the learning material is for training purposes only! For the proper use of the software or hardware, please always use the Operator Manual or Instructions for Use (hereinafter co llectively “Operator Manual”) issued by Siemens Healthineers. This material is to be used as training material only and shall by no means substitute the Operator Manual. Any material used in this training will not be updated on a regular basis and does not necessarily reflect the latest version of the software and hardware available at the time of the training. The Operator's Manual shall be used as your main reference, in particular for relevant safety information like warnings and cautions. Note: Some functions shown in this material are optional and might not be part of your system. Certain products, product related claims or functionalities (hereinafter collectively “Functionality”) may not (yet) be commercially available in your country. Due to regulatory requirements, the future availability of said Functionalities in any specific country is not guaranteed. Please contact your local Siemens Healthineers sales representative for the most current information. The reproduction, transmission or distribution of this training or its contents is not permitted without express written auth ority. Offenders will be liable for damages. All names and data of patients, parameters and configuration dependent designations are fictional and examples only. All rights, including rights created by patent grant or registration of a utility model or design, are reserved. Copyright © Siemens Healthcare GmbH 2020 Siemens Healthineers Headquarters Siemens Healthcare GmbH Henkestr. 127 91052 Erlangen, Germany Phone: +49 9131 84-0 siemens-healthineers.com SIEMENS Unrestricted 0 Published by Siemens Healthcare GmbH © Siemens Healthcare GmbH, 2020 Job Aid Effective Date: 05/XX/2020 | HOOD0516200309 Healthineers Page 3 of 3