PEPconnect

MULTIX Impact C & VA20: RIS Batch Mapping

This video will cover how to use the RIS Batch Mapping function on the system.

This video will demonstrate how to perform risks batch mapping. The batch mapping is performed by Seaman service. Prepare the dot CSV file. The dot CSV file must contain the following risk procedure information. The procedure code, which is the value of the DICOM tag used for mapping the procedure name, which is the name of the risk procedure and the procedure category indicating that the patient is an adult or pediatric patient. Then store the dot CSV file on a USB memory stick, plugged the USB memory into the USB Jack, click batch mapping, click open and select the CSV file. The risk procedure list will populate the batch mapping dialog box. Select the first procedure to be matched by clicking the list. Select the adult or pediatric, select the body region by clicking in the figure. Double click the desired procedure, check the organ programs in the list. Click mapping to map the local procedure to the risk procedure. Click yes to confirm match accuracy. Then repeat the steps described above for all risk procedures until the batch mapping dialog box is empty.

SIEMENS RIS Mapping Management Please note that the learning material is for training purposes only! Name CSR NE AP+LAr For the proper use of the software or hardware, please always use the Operator Manual or Instructions for Use Adult (hereinafter collectively "Operator Manual") issued by Siemens Healthineers. This material is to be used as training material only and shall by no means substitute the Operator Manual. Any material used in this training will not be Exam ob. R AP 2 C•spine chest AP Standing AP supine supine Chest LAT AP AP AP Chest chest AP updated on a regular basis and does not necessarily reflect the latest version of the software and hardware available L AP SIEMENS Warning L AT LAT at the time of the training. Ribs OBL AP AP Wright Ribs LAT AP uR OBL Ankle L AP LAT Ribs OBL supine AP supine -he Operator Manual shall be used as your main reference, in particular for relevant safety information like warnings The Operator Manual shall be used as your main reference, in particular for relevant safety information like warnings to is mapping be is the Healthineers of Waning of —d of Healthineers ' will LAT AP LAT The reproduction, transmission or distribution of this training or its contents is not permitted without express written and caution!. and cautions. authority. Offenders will be liable for damages. Note: Some functions shown in this material are optional and might not be part of your systerr Note: Some functions shown in this material are optional and might not be part of your system. List All names and data of patients, parameters and configuration dependent designations are fictional and examples only. Certain products, product related claims or functionalities described in the material (hereinafter collectively All rights, including rights created by patent grant or registration of a utility model or design, are reserved. "Functionality") may not (yet) be commercially available in your country. Due to regulatory requirements, the future availability of said Functionalities in any specific country is not guaranteed. Please contact your local Siemens Healthineers sales representative for the most current information. Copyright O Siemens Healthcare GmbH, 2021 19:44S7 19:4504 19:4509

  • multix Impact
  • multix impact C
  • va20