MULTIX Impact C & VA20 SmartOrtho & Smart Virtual Ortho

Smart virtual ortho in combination with auto collimation for long leg or full spine enables you to avoid unnecessary retakes by keeping your patient in focus even when you're outside the room. This mean to a smart virtual ortho and virtual auto collimation for full spine and long leg, you can perform exams with accurate position by speeding up your workflows by identifying the correct region of interest. Therefore you need to click on the button on the imaging system. Then the exam 2D camera sends a live image of your patient to your workstation. The region of interest is automatically detected and shown with the blue frame on the imaging system. To adjust the region of interest if needed, select the start and end position by adjusting the upper and lower line. You are still being able to manually adjust the collimation field following your individual preferences to collimate the region of interest. ROI in width. Adjust the right hand or the left line of the region of interest frame. My exam 2D camera helps you to identify movements. With the auto collimation, you can quickly collimate or make collimation corrections at the work station. You don't need to walk back and forth, which helps reduce both walking time and the time the patient must remain still. Check acquisition parameters, collimation, and measuring fields, and click confirm before X ray exposure.

SIEMENS Patient mient Healthineers Jane Doe 202009180953251 @ Siemens Healthcare GmbH, 2021 Other Please note that the learning material is for training purposes only! For the proper use of the software or hardware, please always use the Operator Manual or Instructions for Use (hereinafter collectively "Operator 9-18-1979 Manual") issued by Siemens Healthineers. This material is to be used as training material only and shall by SIEMENS • 202009180953251 SIEMENS no means substitute theOperator Manual. Any material used in this training will not be updated on a Device Informnation Device Information regular basis and does not necessarily reflect the latest version of the software and hardware available at the time of the training. The Operator Manual shall be used as your main reference, in particular for relevant safety information like warnings and cautions. Healthineers Note: Some functions shown in this material are optional and might not be part of yoursystem. The information in this material contains general technical descriptions of specifications and options as well as standard and optional features that do not always have to be present in individual cases. Certain products, product related claims or functionalities described in the material (hereinafter collectively "Functionality") may not (yet) be commercially available in your country. Due to regulatory requirements, 15 the future availability of said Functionalities in any specific country is not guaranteed. Please contact your Improve your workflow local Siemens Healthineers sales representative for the most current information. The reproduction, Smoothen the preparation transmission or distribution of this training or its contents is not permitted without express written with Auto Collimation Hu for orthopedic exams authority. Offenders will be liable for damages. All names and data of patients, parameters and and Smart Virtual Ortho configuration dependent designations are fictional and examples only. All rights, including rights created by SIEMENS • SIEMENS patent grant or registration of a utility model or design, are reserved. Healthineers