PEPconnect

MULTIX Impact: Modifying Default Exposure Parameters Video

This video demonstrates how to modify default exposure parameters on the MULTIX Impact Image Station software. 

This video will illustrate how to modify default exposure parameters. In this example, we will demonstrate how to change the exposure technique for the selected organ program. The exposure technique can be changed from two point to one point by selecting the correct AEC Chamber for the normal patient size. Click the Save as default. Oh GP button. A warning message pops up. Click OK to continue. Another warning message pops up to remind you that all three patient sizes must use the same exposure technique. Select the small and large patient size. Confirm that the dose and cavey values are suitable for the patient size. Change the values of necessary. Click the Save as default OG button again to save the changed values into the OG database. These changed values will then be the default exposure parameters in future exams. The values of KVM as milliseconds dose density measuring field tube load the CU filter. An focus can be changed and saved as default organ program.

Patient Information Devices Information OGP List OGP List Patient Name: Patient Size testMAqq testAAqq Rotation: Position: 201808081342511 201808081342521 SID: Sex: Patient Size Age: 22Y DOB: 1996-08-08 AEC Accession No.: 201808081342521 Warning Devices Information Grid Type: No Grid Are you sure to continue? Grid Status: Grid OUT Guide Grid Orientation: Grid Vertical Grid Horizontal 84cm X-Ray Parameter OK Cancel OK 1.25 Collimator Size: Collimator Aignment: 16.0cmx11.0cm mAs: ms Collimator Aignment: Center alignment kV: W: 52 50 56 Dose: 2.25 1.25 2.25 1.25 2.5 53.5 AEC Density: AEC Field: Middle Chamber Focus: Small Focus cU Filter: O. Omm Density Focus: Small Focus cU Filter: O. Omm Cu filter cU Filter: 0.0mrn O. Omm 0.0mm Tube Load: Grid Type: Tube Load: Grid Type: default Collimation... Image Flip: NO Collimation... Collimation. . Image Flip: NO 15 Label: fi SCU: Detector is not in table bucky. 14/41 SCU: Detector is not in table bucky. mAs connector: ON 11/41 System not ready 13/41 Door open 12/41 Siemens 13:52:22 13:52:24 13:52:28 13:52:36 13:52:37 13:52:439 13:52:48 13:52:49 13:52:53 13:52:59 13:53:137 13:53:19

  • MULTIX Impact
  • Multix
  • RAD 3
  • Impact
  • Multix
  • Multx
  • Impac
  • MULTIX Impact Modifying Default Exposure Parameters
  • Modify Default Exposure Parameters