Multix M: Tomography Setup

Multix M: Tomography Setup Radiography 1. Select Patient from RIS Study Worklist. Or manually enter pa- tient information. 2. Lock the tube to transverse and longitudinal detents. The LEDs will light up when the tube is in the correct detent. 3. Adjust the vertical height to 45 inches (115cm) SID setting. 4. Select the correct tomography arc and fulcrum height, making certain the system locks into position. 5. Select the Tomography Tab and choose the correct OGP. Wait for the green “ready” screen before making an exposure. 6. You are now ready to make the exposure. The tube will move longitudinally and in the defined angle. Remember to change fulcrum height between exposures. 7. You are able to send individual images during the exam with- out ending the study. To do so, click the Send icon on the Or- gan Program Preview Screen. SIEMENS siemens.com/healthineers Healthineers Job Aid | Multix M: Tomography Setup Effective Date: 8/23/2016 | 392 Please note that the learning material is for training purposes only! For the proper use of the software or hardware, please always use the Operator Manual or Instructions for Use (hereinafter collectively “Operator Manual”) issued by Siemens Healthineers. This material is to be used as training material only and shall by no means substitute the Operator Manual. Any material used in this training will not be updated on a regular basis and does not necessarily reflect the latest version of the software and hardware available at the time of the training. The Operator's Manual shall be used as your main reference, in particular for relevant safety information like warnings and cautions. Note: Some functions shown in this material are optional and might not be part of your system. Certain products, product related claims or functionalities (hereinafter collectively “Functionality”) may not (yet) be commercially available in your country. Due to regulatory requirements, the future availability of said Functionalities in any specific country is not guaranteed. Please contact your local Siemens Healthineers sales representative for the most current information. The reproduction, transmission or distribution of this training or its contents is not permitted without express written authority. Offenders will be liable for damages. All names and data of patients, parameters and configuration dependent designations are fictional and examples only. All rights, including rights created by patent grant or registration of a utility model or design, are reserved. Copyright © Siemens Healthcare GmbH ………………………………………………………… Siemens Healthineers Headquarters Siemens Healthcare GmbH Henkestr. 127 91052 Erlangen, Germany Telephone: +49 9131 84-0 siemens.com/healthineers Siemens Healthineers Services Page 2 of 2 © Siemens Healthcare GmbH, 2017