nexaris Angio-CT - Basic Patient Positioning Job Aid

Basic Patient Positioning Job Aid nexaris Angio-CT Objective  For the purposes of positioning the patient at the beginning of the procedure  Utilize the Quick Switching feature without CT or Artis C-arm movement  Keep the CT & C-arm in the same position while the patient is moved from one modality to another by moving only the table Patient Positioning Procedure 1. Place the C-arm in the Working Area Artis – Working Area Published by Siemens Healthcare GmbH © Siemens Healthcare GmbH, 2018 Master Template: Effective Date: 08/22/2017 | HOOD05162002647849 Job Aid: Effective Date: 10/17/2018 | HOOD05162002950330 Job Aid | Patient Positioning Effective Date: 10/17/2018 | HOOD05162002950330 2. Move the Artis Table to the maximum end position [125] towards the table base 3. Place the target area of interest below the C-arm 4. Move the table to the maxiumum end position [0] towards the CT scanner Published by Siemens Healthcare GmbH © Siemens Healthcare GmbH, 2018 Job Aid | Patient Positioning Effective Date: 10/17/2018 | HOOD05162002950330 5. Move the CT scanner towards the Artis C-arm to confirm that the CT can cover the defined target volume Published by Siemens Healthcare GmbH © Siemens Healthcare GmbH, 2018 Job Aid | Patient Positioning Effective Date: 10/17/2018 | HOOD05162002950330 Please note that the learning material is for training purposes only! For the proper use of the software or hardware, please always use the Operator Manual or Instructions for Use (herein- after collectively “Operator Manual”) issued by Siemens Healthineers. This material is to be used as training material only and shall by no means substitute the Operator Manual. Any material used in this training will not be updated on a regular basis and does not necessarily reflect the latest version of the software and hardware available at the time of the training. The Operator's Manual shall be used as your main reference, in particular for relevant safety information like warnings and cautions. Note: Some functions shown in this material are optional and might not be part of your system. Certain products, product related claims or functionalities (hereinafter collectively “Functionality”) may not (yet) be commercially available in your country. Due to regulatory requirements, the future availability of said Functionalities in any specific country is not guaranteed. Please contact your local Siemens Healthineers sales representative for the most current information. The reproduction, transmission or distribution of this training or its contents is not permitted without express written authority. Offenders will be liable for damages. All names and data of patients, parameters and configuration dependent designations are fictional and examples only. All rights, including rights created by patent grant or registration of a utility model or design, are reserved. Copyright © Siemens Healthcare GmbH 2018 ………………………………………………………… Siemens Healthineers Headquarters Siemens Healthcare GmbH Henkestr. 127 91052 Erlangen, Germany Telephone: +49 9131 84-0 siemens.com/healthineers Published by Siemens Healthcare GmbH © Siemens Healthcare GmbH, 2018