nexaris Angio-CTsyngo Aortic Valve Guidance Job Aid

syngo Aortic Valve Guidance Job Aid nexaris Angio-CT Use pre-op CTA data for planning Use intra-op DynaCT data for planning • Acquire a 5s DCT Card Avg contrasted • Load the CTA data DynaCT (Alternatively, start with 3D Wizard) • Start syngo Aortic Valve Guidance  syngo Aortic Valve Guidance is started automatically Planning  The aortic root is segmented automatically, marked with overlay landmarks • Switch among the landmarks to verify the positions, and adjust the landmarks if necessary • Optional: Measure the valve annulus diameter and area Overlay • Select syngo 3D Roadmap • Perform 2D/3D or 3D/3D Registration • Disable syngo 3D Roadmap • Rotate aortic root perpendicularly around centerline to find an optimal view, or select Rotate Aorta from the Onscreen Menu • Optional: Adjust the valve implantation height +10 mm SIEMENS Effective Date: 04/19/2018 | HOOD05162002840060 Healthineers . syngo Aortic Valve Guidance Job Aid | nexaris Angio-CT Effective Date: 04/19/2018 | HOOD05162002840060 Overlay (Continued) • Send angulation to C-arm (possible on 4D task card/touchscreen/Adjust C-arm in VRT Onscreen menu) • Deflect the joystick to drive C-arm to defined angulation • Select syngo 3D Roadmap to overlay 3D graphics on fluoroscopy for guidance Siemens Healthineers Services Page 2 of 3 Please note that the learning material is for training purposes only! For the proper use of the software or hardware, please always use the Operator Manual or Instructions for Use (hereinafter collectively “Operator Manual”) issued by Siemens Healthineers. This material is to be used as training material only and shall by no means substitute the Operator Manual. Any material used in this training will not be updated on a regular basis and does not necessarily reflect the latest version of the software and hardware available at the time of the training. The Operator's Manual shall be used as your main reference, in particular for relevant safety information like warnings and cautions. Note: Some functions shown in this material are optional and might not be part of your system. Certain products, product related claims or functionalities (hereinafter collectively “Functionality”) may not (yet) be commercially available in your country. Due to regulatory requirements, the future availability of said Functionalities in any specific country is not guaranteed. Please contact your local Siemens Healthineers sales representative for the most current information. The reproduction, transmission or distribution of this training or its contents is not permitted without express written authority. Offenders will be liable for damages. All names and data of patients, parameters and configuration dependent designations are fictional and examples only. All rights, including rights created by patent grant or registration of a utility model or design, are reserved. Copyright © Siemens Healthcare GmbH 2018 ………………………………………………………… Siemens Healthineers Headquarters Siemens Healthcare GmbH Henkestr. 127 91052 Erlangen, Germany Telephone: +49 9131 84-0 Published by Siemens Healthcare GmbH © Siemens Healthcare GmbH, 2018

  • nexaris Angio-CTsyngo Aortic Valve Guidance Job Aid