Performing Automated Atellica® Decapper Autocheck Job Aid Version 1.25 and Below

Atellica® Decapper SIEMENS Healthineers Performing Automated Decapper Autocheck Job Aid lealthineers SIEMENS Atellica Solution Version 1.18.1.3234003 1 P-P1-0 System Samples Inventory Calibration OC Patient Orders Worklist Maintenance Setup 2 Schedule Report Log IMT Data Restore Software Updates Copy Configuration Decapper Autocheck is an automated maintenance activity that Filter Module: D-PP-02 Frequency: All Time: All Performed By: All tests the health of various Decapper components. The Decapper 3 Module D-PP-02 Module Activity Scheduled Sun-24 Mon-25 Tue-26 Wed-27 Thu-28 Fri-01 5 Perform ... Frequency All D-PP-02 V D-PP-02 Decapper Autocheck pauses processing until the autocheck completes in approximately 5 4 .:: 2/28/2019 1:00 V V V V Mark as Completed Time All D-PP-02 D-PP-02 Cleaning the Decapper (Monthly) 3/1/2019 7:00 Not Perform .. minutes. Performed By All D-PP-02 D-PP-02 Decapper Preventive Maintenance 1/1/2020 0:00 Search Text Enter the activity name. Procedure Details The system automatically performs the autocheck daily at a Scheduled by Operator Edit/View .. specified time or it can be manually performed on demand. The Scheduled Automatically Delete Scheduled by Service system alerts the operator 15 minutes before the scheduled activity Failed Overdue begins. Inprocess Completed X Not Performed To perform the Decapper Autocheck activity manually: With Comments 1. On the Command bar, select Maintenance View Activities 2. Select Schedule Add Activity .. Set Warning ... CD 3. In Module, select the Decapper from the drop-down menu ? PEP LabManager Wednesday, February 27, 2019 2:41 PM 4. Select Decapper Autocheck 5. Select Perform 6. Wait approximately 5 minutes for autocheck to complete 1 Effective Date: 5/28/2019| HOOD05162003008281 Unrestricted © Siemens Healthcare GmbH, 2019 SIEMENS Healthineers Please note that the learning material is for training purposes only! For the proper use of the software or hardware, please always use the Operator Manual or Instructions for Use (hereinafter collectively “Operator Manual”) issued by Siemens Healthineers. This material is to be used as training material only and shall by no means substitute the Operator Manual. Any material used in this training will not be updated on a regular basis and does not necessarily reflect the latest version of the software and hardware available at the time of the training. The Operator's Manual shall be used as your main reference, in particular for relevant safety information like warnings and cautions. Note: Some functions shown in this material are optional and might not be part of your system. Certain products, product related claims or functionalities (hereinafter collectively “Functionality”) may not (yet) be commercially available in your country. Due to regulatory requirements, the future availability of said Functionalities in any specific country is not guaranteed. Please contact your local Siemens Healthineers sales representative for the most current information. The reproduction, transmission or distribution of this training or its contents is not permitted without express written authority. Offenders will be liable for damages. All names and data of patients, parameters and configuration dependent designations are fictional and examples only. All rights, including rights created by patent grant or registration of a utility model or design, are reserved. Atellica, and all associated marks are trademarks of Siemens Healthcare Diagnostics Inc. or its affiliates. All other trademarks and brands are the property of their respective owners. Product availability varies by country and is subject to varying regulatory requirements. Please contact your local representative for availability. Copyright © Siemens Healthcare GmbH 2019 Global Siemens Healthineers Headquarters Henkestr. 127 91052 Erlangen, Germany Phone: +49 9131 84 0 siemens.com/healthineers 2 Effective Date: 5/28/2019| HOOD05162003008281 Unrestricted © Siemens Healthcare GmbH, 2019