Positioning - Safety Video

Multiple Kev SIEMENS Multiple Kev SIEMENS Please note that the learning material is for training purposes only. LEAP L EAp SIEMENS Multiple Kev LEAP SIEMENS SIEMENS LEAP L EAp For the proper use of the software or hardware, please always use the Operator Manual or Instructions for Use (hereinafter collectively Siemens Healthineers presents SIEMENS "Operator Manual") issued by Siemens Healthineers. This material is to be used as training material only and shall by no means substitute the Operator Manual. Any material used in this training will not be updated on a regular basis and does not necessarily reflect the latest SIEMENS Collimator Box touch sensors Pinch Points Positioning - Safety Reset Emergency Stop Touch Pads version of the software and hardware available at the time of the training. Emergency Stop Buttons Detector Sensors NOTE The Operator Manual shall be used as your main reference, in particular for relevant safety information like warnings and cautions. SIEMENS Please Close Stop Circuit SIEMENS Please note: Some functions shown in this material are optional and might not be part of your system. SPECT and SPECT/CT Certain products, product related claims or functionalities (hereinafter collectively "Functionality") may not (yet) be commercially available There is an object below the integrated collimator changer that is preventing the bed from lowering. in your country. Due to regulatory requirements, the future availability of said Functionalities in any specific country is not guaranteed. Healthineers Contact with a touch pad has occurred. Please contact your local Siemens Healthineers sales representative for the most current information. 227kg (5001b) (5001b) The reproduction, transmission or distribution of this training or its contents is not permitted without express written authority. Offenders will be liable for damages. e. media Cancel Continue e. media All names and data of patients, parameters and configuration dependent designations are fictional and examples only. eeo All rights, including rights created by patent grant or registration of a utility model or design, are reserved. Detector 2 Gantry touch @ Siemens Healthcare GmbH 2021 Detector 2 Gantry touch pad Dogt eave any objects in this area. Refrain from, holding the front edge of the pallet while in motion. SIEMENS Gantry left side Refrain from holding the front edge of the pallet while in motion. Refrain from holding the edge of the pallet while in motion. Refrain from holding the e ge of the pallet while in motion. Refrain from holding thent edge of the indlex while in motion. There is an object below the integrated collimator changer Hand control buttons are lit. Gantry is ready to move again, Hand control buttons are •lit. Gantry is ready to move again. Hand control buttons are lit. Gantry is ready to move again. Hand contro, buttons are not lit. Gantry has no motion. Hand contro,buttons are not lit. Gantry has no motion. Press the Pallet Release button underneath the handle Press the Index Release button underneath the handle A Notific tion is displayed when E-Stop is activated. Contact with touch pad on Detector 2 has occurred. The bed index handle is used to remove the pallet Don •t place any objects between in ex and table. Don 't place any objects between indlex and tablex. Don't place any object between pallet and index. One Sensor on each side of the Collimator box. Don't leave any object on top of the rear bed. Don 't leave any object on top of the rear bed. Only Detector 2 "Out" motion is possible. All motion stops when pressure applied. Don't leave any object next to the PHS. Light rail touch pad on each light rail. Note: Only available on new systems. Detector Sensors Detecto 1 Yoke Don't insert fingers into the gap. etector 1 Yoke L Detector 2 Collimator touch pad Detector 1 Yook-Ahead sensor PHS down motion is blocked. Detector 1 Gantry touch pad Collimator Box touch sensors Detector 1 Light rail sensor Patient maximum weight Press Reset button. Gantry lefht side ok-Ahead sensor k-Ahead sensor and pull the index unit out to release the patient. Constant beep9g sound audible when pressed. from the gantry in emergency situations only. and pull the pallet out to release the patient. that is preventing the bed from lowering.